Installation Installing the Memory Card
3.13
Installing the Memory Card
To operate the OpenAttendant and OpenVoice programme packages you require a memory card (Compact Flash card Type I or Type II). The memory card contains the following files:
■ the voice files and welcome/closing texts for the voicemail system OpenVoice as well as messages which callers have left,
■ the audio files for the programme package OpenAttendant, with which you can create individual information systems such as voice portals and voicemail systems.
Only use high speed memory cards which are recommended by Aastra. Other memory cards or “Microdrive” type memory cards may not be able to maintain the required access speed.
Note: If you use a memory card other than one recommended by Aastra, Aastra will not accept any responsibility for the correct functioning of the OpenVoice and OpenAt-
tendant programme packages.
For further information, please contact your local dealer or the Aastra sales department.
The following instructions are intended for persons authorised to install such memory cards, in the event that there is still no memory card available in the communications system.
3.13.1 Safety Precautions
Please note: The memory card may only be installed by authorised personnel because the slot for the card is located on the module board of the communications system.
DANGER!
High voltage inside the device.
61
