Setup. Siemens SP65
Quảng cáo
Quảng cáo
left page (73) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
Setup 73
Setup
Profiles
C
¢
T
¢
Profiles
Several settings can be stored in a phone profile in order, for example, to adapt the phone to the surrounding level of noise.
• Five standard profiles are provided with default settings. They can be changed however:
Normal environment
Quiet environment
Noisy environment
Car Kit
Headset
• You can set two personal profiles
( <Name> ).
• The special profile Aircraft mode is fixed and cannot be changed.
Switching on
I
Select default profile or personal profile.
C
Switch on profile.
Profile settings
Edit a default profile or create a new personal profile:
Select profile.
I
§Options§ Open menu.
Change sett.
Select.
The list of available functions is displayed.
When you have finished setting a function, return to the profile menu where you can change a further setting.
Additional information
Call up the list in standby mode:
G
The profile list is displayed.
The active profile is identified with
·
.
left page (74) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
74 Setup
Profile options
§Options§ Open menu.
Activate Activate selected profile.
Change sett.
Change profile settings.
Copy from Copy settings from another profile.
Rename Change personal profile
(except default profiles).
Car Kit
If an original Siemens car kit is used, the profile is switched on automatically when the phone is inserted into the cradle (also see accessories).
Headset
The profile is only switched on automatically if an original
Siemens headset is used (also see accessories).
Aircraft mode
All alarms (appointments, alarm clock) are deactivated. This profile cannot be modified.
Switching on
Scroll to Aircraft mode .
H
C
Confirm selection.
C
Confirm safety inquiry again in order to activate the profile. The phone switches itself off automatically.
Normal mode
When you switch on your phone again, the previously set profile will be reactivated automatically.
left page (75) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
Setup
Themes
C
¢
T
¢
Themes
Load a completely new visual presentation onto your phone. At the press of a key various functions are re-organised on a theme basis, e.g.
Start up/shut down animation, wallpaper, screensaver, start up/ shutdown melody, additional animations.
Theme files are compressed to save memory space. After being downloaded or called up from
My stuff , these are automatically unzipped when activated.
Setup
Activating a new theme
Select theme.
I
C
Display theme preview.
C
Activate new theme.
75
left page (76) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
Setup
76 Setup
Display setup
C
¢
T
¢
Display setup
¢ Select function.
Language
Set the language for the display text.
When “automatic” is set, the language of your home service provider is used.
If a language that you do not understand happens to be set, the phone can be reset to the language of your home service provider with the following input (in standby mode):
* # 0 0 0 0 #
A
Text input
T9 preferred
Activate/deactivate intelligent text entry.
Input language
Select language for text entry. Languages with T9 support are marked with the T9 symbol.
Wallpaper
Set wallpaper graphic for the display.
Logo
Choose graphic to be displayed instead of the provider logo.
Colour skin
Select colour skin, incl. background image for the entire user interface.
Screensaver
After a specifiable time, the screensaver shows a picture in the display.
An incoming call and/or pressing any key will end the function except if the safety function is activated.
Changing settings:
§Change§ Settings are displayed.
Preview
Display the screensaver.
Style
Select Analogue clock , Digital clock ,
Bitmap , Energy saving
Bitmap
Select image in My stuff .
left page (77) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
Timeout:
Set period after which the screensaver starts.
Code protection:
The phone code is requested to close the screensaver.
Auto key lock:
Automatic keypad locking if no key has been pressed for one minute in standby mode.
Unlocking:
Press and hold.
#
Note
The animated Bitmap screensaver and the
Digital clock considerably reduce the phone’s standby time.
Start up anim.
Select animation to be shown when phone is switched on.
Shutdn anim.
Select animation to be shown when phone is switched off.
Setup 77
Own greeting
Enter greeting to be displayed instead of animation when phone is switched on.
Big letters
You can choose between two font sizes for the display.
Illumination
Set display illumination to brighter/darker. The darker the setting the longer the standby time.
I
Press the joystick repeatedly at the top/bottom to adjust up or down.
left page (78) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
Setup
78 Setup
Ringtones
C
¢
T
¢
Ringtones
¢ Select function.
Set the signal tones on the phone to suit your requirements.
Ringer setting
On/off
Beep
Activate/deactivate all tones.
Reduce ringtone to a short signal (beep).
Silent alert
To avoid the disturbance caused by a ringing phone, you can activate the silent alert function as an alternative. The silent alert can also be activated in addition to the ringtone
(e.g. in noisy environments). This function is deactivated when the battery is being charged and accessories are connected (except the headset).
C
I
Settings are displayed for changing.
Select from several silent alert versions.
C
Confirm setting.
Volume
Set different volumes for types of call/functions.
C
Settings are displayed for changing.
I
Select
Incoming call
Messages
CB services
Alarm clock
Organiser
System
Applications
§OK§ The ringtone sounds again.
I
Set volume.
C
Confirm setting.
Additional information
Please make sure you have accepted the call before holding the phone to your ear.
This will avoid damage to your hearing from loud ringtones.
left page (79) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
Assigning a ringtone
A ringtone which has already been selected will be played or the list of possible ringtones will be displayed for selection.
d Calls
Assign a single ringtone to all phone numbers in the Addressbook.
Group calls
Assign a different ringtone to each group.
Other calls
Assign one ringtone to the remaining calls.
Setup
More melodies
Assign further ringtones for:
Messages
Alarm clock
Organiser
Startup melody
Shutdown mel.
or record new with:
Sound recorder
You will find a list of all supported formats for ringtones in My stuff
79
left page (80) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
Setup
80 Setup
Call setup
C
¢
T
¢
Call setup
¢ Select function.
Hide ID
b
When you make a call, your phone number can be displayed on the recipient's display (depending on the service providers).
To suppress this display, you can enable the “Hide ID” mode for all subsequent calls or just for the next call.
You may need to register separately with your service provider for these functions.
Call waiting
b
If you are registered for this service, you can check whether it is set and you can activate/deactivate it.
Divert
You can specify the conditions under which calls should be diverted to your mailbox or other numbers.
Status check
You can check the current divert status for all conditions. After a short pause, the current situation is transmitted by the network and displayed.
Ö
Õ
Ô
Condition set.
Not set.
Display if status is unknown (e.g. with a new SIM card).
Clear all
All set diversions are cleared.
b
Setting up call divert (example)
The most common condition for call divert is, for example:
Unanswered
I b
Select Unanswered .
(Includes the conditions
Not reachable , No reply ,
Busy , see below)
C
Confirm.
Set Select.
C
Confirm.
Ï
/
J
§OK§
Select or enter the phone number to which the calls are to be diverted.
§Mailbox§ Use existing mailbox phone numbers, or enter them if necessary.
Confirm. After a short pause, the setting is confirmed by the network.
left page (81) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
All calls
All calls are diverted.
Ç b
Symbol in the top line of the display in standby mode.
Not reachable
Divert occurs if phone is switched off or is out of range.
No reply
A call is only diverted after a delay that is determined by the network.
The period can be set to a maximum of 30 seconds in 5-second intervals.
Busy
Divert occurs if a call is in progress. If
Call waiting
will hear the call waiting tone during
Receiving fax b
Fax calls are diverted to a number with a fax connection.
Receiving data
Data calls are diverted to a phone number with a PC connection. b
Additional information
Note that the divert is stored in the network and not in the phone (e.g. when the
SIM card is changed).
Reactivate divert
The last divert has been stored. Proceed as with “Set divert”. The stored phone number is displayed. Confirm number.
Setup 81
Call screening
b
Only calls from phone numbers that are in the Phonebook/Addressbook or assigned to a group are signalled.
Other calls are only displayed.
Any key answ.
Incoming calls can be accepted by pressing any key (except for
B
).
Minute beep
During the call, you will hear a beep after each minute as a reminder of the time elapsed. The person you are talking to does not hear this beep.
left page (82) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
Setup
82 Setup
Phone setup
C
¢
T
¢
Phone setup
¢ Select function.
Key tones
Set the type of acoustic key acknowledgement.
Info tones
Set service and alarm tones:
On/off Activate/deactivate tones.
Extended If switched on, a wider range of service tones is available, e.g. end of menu reached, network connection interrupted.
Auto off
The phone switches off each day at the set time.
Activating
§Time§
J
Press.
Enter time
(24-hour clock).
Confirm.
§OK§
Deactivating
§Manual§ Press.
§OK§ Confirm.
Phone identity
The phone identity number (IMEI) is displayed. This information may be useful for customer service.
Device check
After the last information page, a self-test as well as individual tests are offered. If you select Selftest , all individual test are carried out.
Software version
Display the software version for your phone in standby mode:
* # 0 6 #, then press §More§ .
Memory assis.
The memory assistant will help you if there is insufficient phone memory.
If required it can also be started automatically from applications.
After their capacities have been checked, all files and folders are displayed along with their size and may be viewed/opened and, if necessary, deleted.
left page (83) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
File system
Format
(Phone-code protected)
The telephone memory is formatted and all saved data such as ringtones, pictures, games, etc. is deleted.
Formatting may take longer than one minute.
Clean up
Create more memory by deleting temporary files no longer required.
Format card
All data on the RS MultiMediaCard™ is deleted.
Eject card
Allows the card to be removed from the phone.
Setup 83
Master reset
The phone is reset to default values
(factory setting). This does not affect the SIM card or the network settings.
Alternatively, in standby mode enter:
* # 9 9 9 9 #
A
left page (84) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
Setup
84 Setup
Clock
C
¢
T
¢
Clock
¢ Select function.
Time/date
The clock must be set correctly once, at start-up.
§Change§ Press.
J
First enter the date
(day/month/year), then the time (hours/ minutes/seconds).
Additional information
If the battery is removed for longer than
30 seconds, the clock must be reset.
Time zones
The time zone can be selected in the world map or a city list:
World map
F
Select the desired time zone.
City list
I
Select a city in the selected time zone.
§Options§ Open menu.
Set Set time zone.
Auto time zone
=
Have the time zone automatically set by the network.
Search city Search for a city.
Help Operating instructions.
Date format
Select the display format for the date.
Time format
Select 24h or 12h .
Buddhist year
Switch to the Buddhist year (not on all phone models).
Show clock
Activate/deactivate time display in standby mode.
Auto time
The timezone is identified automatically.
b
left page (85) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
Setup
Connectivity
C
¢
T
¢
Connectivity
¢ Select function.
GPRS
(General Packet Radio Service)
C
Switch GPRS on/off.
b
GPRS is a method for transmitting data faster in the mobile network.
Use GPRS and if the network has sufficient capacity, you can be connected to the Internet permanently.
The network provider charges only for the volume of data transmitted.
Some service providers do not yet support this service.
Shown in the display:
£
Activated and available.
¢
Registered.
¤
Temporarily interrupted.
GPRS info
Display the transmitted volume.
Setup 85
IrDA
C
Activate/deactivate IrDA.
Your phone has an infrared interface. With this interface, you can exchange data such as pictures, ringtones, Addressbook entries, business cards or organiser data with other devices which also have an infrared interface.
The infrared interface is on the left side of the phone. The distance between the two devices must not exceed 30 cm/12 inch. The infrared windows in both appliances must be aligned as accurately as possible with each other.
Shown in the display:
¯
IrDA activated.
®
During transmission.
If IrDA is activated, standby time for the phone will be reduced.
left page (86) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
86 Setup
Bluetooth
®
(BT)
Bluetooth is a short-range radio connection by means of which a headset or car kit, for example, can be connected without the need for wires.
Using the Send/print function in the options menu for the application concerned you can also use this route to send data.
With SAP (SIM Access Profile) a car phone GSM module can, for example, use the access data from the SIM card on your phone. There is no need to swap the SIM card. It is possible that SAP might not be supported by your service provider.
Each Bluetooth device has its own specific address and can be given a self-explanatory name as an option.
Password protection ensures the security of a Bluetooth connection, as does including the BT partner in a list as a “confidential” device.
To establish a Bluetooth connection between your phone and other
Bluetooth devices you must activate
Bluetooth.
The Bluetooth ® word mark and logos are owned by Bluetooth SIG, Inc and any use of such marks is under licence.
Other trademarks and trade names are those of their respective owners.
C
Activate/deactivate
Bluetooth.
My BT name : You can give the phone a name when you activate Bluetooth for the first time.
If Bluetooth is activated, IrDA
(infrared) is not active and vice versa.
If Bluetooth is activated, standby time for the phone will be reduced.
Bluetooth setup
C
Call up the setting functions (Bluetooth must be activated).
• Search/Search all
Specify which BT devices are to be searched for:
All
Audio
Phone
All BT devices
E.g. headset, car kit
Other BT phones
PC Personal computer with
BT connection
C
Start search
The number and name of the most recently found BT device are displayed.
left page (87) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
C
The search is ended and the first 10 devices found are shown in a list.
§Retry§ Start new search.
Scroll to entry required.
I
C
Dial the device or start the procedure for acceptance as a “confidential” device
(see below).
§Options§ Open menu.
Details Display the name and address of the BT device.
Trusted dev.
Add the device as confidential to the list of known devices. To do this, enter the password for the other device. The device must first be set to a “confidential mode”.
If the list is full it is not possible to add another device.
To known list
Add to the list of known devices (see below).
To black list Add to the black list (see below).
Retry Start new search.
Setup 87
• Known devices
To make selection easier, frequent
BT partners can be recorded in the known device list. If entries are
“confidential”, no password query is made.
• Last connect.
List of most recently and/or still connected devices.
• Black list
Attempts to make connections to devices in this list are rejected.
List options
Each list offers different functions.
§Options§ Open menu.
Mark as audio
If not possible automatically, specify device as an
“audio” device.
Increase prio.
Move entry up the list so that, for example, a specific audio device is used first.
Decrease prio.
To known list
Move entry down the list.
Move entry to the list of known devices.
To black list Move entry to the black list.
(For standard functions see p. 16)
left page (88) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
88 Setup
• My BT name
The phone is given a name (max.
16 characters) – this is the name the partner sees. If no name is given, the phone uses the non-changeable device address.
• Visib.to others
Set how your phone should respond to other BT devices. This means (if
“visible”) for example that the device address or the BT name of your phone is shown to other BT devices if they request this in order to receive or send data.
• Not visible
Your phone is not “visible” to other
BT devices. Known devices such as
Bluetooth™-Headset/Car Kit continue operating.
• Auto mode
Your phone is not “visible” to other
BT devices for several minutes. You will then be asked if “visibility” should continue.
Shown in the display
Bluetooth activated.
¨
©
ª
«
Bluetooth visible to others.
Bluetooth during data transfer.
Call to Bluetooth device accepted.
Data services
Basic setting and activation of the connection profiles for data transmission such as MMS, WAP .
The phone default setting varies from service provider to service provider:
• The settings have already been implemented by the provider. You can start immediately.
• Access profiles have already been created by your provider. Then select and activate profile.
• The access profiles must be configured manually.
If necessary, check with your service provider for details. You will also find the current settings for the service provider on the Internet at www.siemens.com/ mobilephonescustomercare in the FAQ section.
Selecting a profile
I
Select the profile.
C
Confirm selection.
left page (89) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
Setting a profile
Select the profile.
I
§Options§ Open menu.
§Edit§
I
§Edit§
Open the selection.
Select CSD settings , and/ or GPRS settings .
Make the settings as specified by your service provider.
HTTP profile
The phone default setting varies from service provider to service provider:
• The settings have already been implemented by the provider. You can start immediately.
• Access profiles have already been created by your provider. Then select and activate profile.
• The access profiles must be configured manually.
If necessary, check with your service provider for details. You will also find the current settings for the service provider on the Internet at www.siemens.com/ mobilephonescustomercare in the FAQ section.
Make the settings.
I
Setup 89
Authentication
Activate or deactivate encrypted dial-up (CSD connections only) for
Internet access.
Fax/data
Fax/data mode using a PC
With the phone and a connected PC, you can transmit and receive faxes and data. Appropriate software for fax and data communication must be available on your PC and there must be a connection to the phone.
Fax and data services must be enabled by the service provider. There are variations in fax and data reception, depending on the network.
Please ask your service provider about this.
Send voice/fax b
Set this function on the phone before transmission so that you can switch from voice mode to fax mode.
Rec. voice/fax b
(Only if no special fax or data number is available)
Start the required communication program on your PC and activate the function on the phone during the call
(the PC will take over the connection).
left page (90) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
90 Setup
End transmission
End transmission with PC software and/or press .
B
Rec. fax/data b
Your service provider has given you a number for telephoning and a fax/data number.
The call is signalled by a special ringtone and the type of call (fax or data) is displayed. Now start the communication program on your PC to receive the fax/data.
left page (91) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
Setup
Security
C
¢
T
¢
Security
¢ Select function.
Auto key lock
The keypad is locked automatically if no key has been pressed for one minute in standby mode. This prevents the phone from being used accidentally. However, you can still be called and you can still make an emergency call.
Additional information
The keypad can also be directly locked and unlocked in standby mode.
In each case:
Press and hold.
#
Direct call
(Phone-code protected)
Only one phone number can be
Setup 91
Only
‚ b
(PIN2 or phone-code protected)
Dialling options are restricted to
SIM-protected phone numbers in the
Phonebook. If only area codes are entered, relevant phone numbers can be added to these manually before dialling.
If the SIM card does not support PIN2 input, the whole Phonebook can be protected with the phone code.
PIN codes
PIN control , Change PIN , Change PIN2 ,
Chg.phonecode
This SIM only
b
(Phone-code protected)
The phone can be connected to a
SIM card once the phone code is entered. Unless the phone code is known the phone will not operate with a different SIM card.
If the phone is to be used with a different SIM card, enter the phone code when requested.
left page (92) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
92 Setup
Barrings
b
Barring restricts the use of your
SIM card (not supported by all service providers). You need a 4-digit network password for network barring. Your service provider will give you this password. You may need to be registered separately for each barring.
Outgo. access
All outgoing calls except emergency numbers are barred.
Outgoing intl.
(International outgoing)
Only national calls can be made.
Out.int.x.home
(International outgoing without home country)
International calls are not permitted.
However you can make calls to your home country when abroad.
All incoming
The phone is barred for all incoming calls (forwarding all calls to mailbox provides a similar effect).
When roaming
You do not receive calls when you are outside your home network. This means that no charges are incurred for incoming calls.
Status check
The following information can be displayed after a status check:
Ö
Õ
Ô
Barring set.
Barring not set.
Status unknown
(e. g. new SIM card).
Clear all
All barrings are deleted. A password which the service provider will give you is necessary for this function.
left page (93) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
Setup
Network
C
¢
T
¢
Network
¢ Select function.
Line
b
This function is only displayed if it is supported by the service provider.
Two separate phone numbers must be registered on the phone.
Select line
Select the currently used phone number.
\
Display current phone number.
Protected
(Phone-code protected)
You may limit usage to one phone number.
Additional information
Special settings may be made for each phone number (e.g., melody, call divert etc.) To do this, first switch to the required phone number.
Switch from phone number/connection in standby mode:
0
Press.
§Line 1§ Press.
Setup 93
Network info
The list of GSM networks currently available is displayed.
Æ
Indicates non-authorised service providers
(depending on SIM card).
Choose netwrk
Network search is restarted. This is useful if you are not on your home network or want to register on a dif- ferent network. The network list is rebuilt when Auto network is set.
Auto network
Activate/deactivate, see also
Choose netwrk above. If “Automatic network” is activated, the next network on the list is dialled in ranking order of your “preferred networks”.
Otherwise a different network can be selected manually from the list of the available GSM networks.
Pref. network
Enter your preferred service providers here for when you leave your home network (e.g. if there are differences in price).
left page (94) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
94 Setup
Your service provider is displayed:
§List§ Display list of preferred networks.
Create/change entry:
<Empty> or select an existing entry, then select a new service provider in the list and confirm.
Record new service provider
(last entry in the list):
Furth.network
Select, enter the provider data and save it.
Additional information
If you are outside your home network, your phone automatically dials another GSM network.
If the signal strength of the preferred network is inadequate when you switch on the phone, the phone may register in a different network. This can change when the telephone is next switched on or if another network is selected manually.
Band selection
Select either GSM 900,
GSM 1800 or GSM 1900.
Fast search
When this function is active, network reconnection is speeded up (standby time is reduced).
b
User group
b
Depending on the service provider, you can create groups with this service. These can have access to internal (company) information, for example, or special rates apply.
Please check with your service provider for details.
Active
Activate/deactivate function.
“User group” must be deactivated for normal phone use.
Select group
You can select or add groups other than preferred groups (see below).
Code numbers for the groups are obtained from your service provider.
Outgo. access
In addition to network control for a user group, it is possible to set whether outgoing calls outside the group are permitted. If the function is deactivated, only calls within the group are permitted.
Pref. group
If activated, calls may only be made within this standard user group
(depending on the network configuration).
left page (95) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
Setup
Accessories
C
¢
T
¢
Accessories
¢ Select function.
Car Kit
Only in combination with an original
Siemens handsfree car kit
(see p. 125). The car kit profile is
activated automatically when the phone is inserted into the cradle.
Auto answer
(factory default: off)
Calls are accepted automatically after a few seconds. Eavesdropping is possible!
Shown on the display.
Å
Automatic switch off
(factory default: 2 hours)
The phone is powered by the car's power supply. You can adjust the time between switching off the ignition and the time at which the phone switches off automatically.
Car loudspk.
Improves playback in certain circumstances.
Setup 95
Automatic settings
• Permanent illumination: switched on.
• Key lock: switched off.
• Charging the phone battery.
• Auto. activation of the car kit profile when phone is inserted in the cradle.
Headset
Only in conjunction with an original
Siemens headset (see accessories). If an original Siemens headset is used the profile is automatically activated when the headset is plugged in.
Auto answer
(factory default: off)
Calls are accepted automatically after a few seconds (except where the ringer is switched off or set to beep). You should therefore be wearing the headset.
Automatic setting
Accept call with Call key or PTT key
(Push To Talk), even when the auto key lock is activated.
Auto answer
If you do not notice that your phone has accepted a call, there is the danger that the caller may eavesdrop.
Tải xuống
Quảng cáo
Các tính năng chính
Black
132 x 176 pixels
MMC
Bluetooth
Multimedia Messaging Service (MMS)
Lithium-Ion (Li-Ion) 750 mAh