Questions & Answers. Siemens SP65
विज्ञापन
विज्ञापन
left page (117) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
Questions & Answers 117
Questions & Answers
If you have any questions on the use of your phone, you can contact us at
www.siemens.com/mobilephonescustomercare around the clock. As further help we have listed below some frequently asked questions and answers.
Problem
Phone cannot be switched on.
Standby time is too short.
Charging error
(charge icon not displayed).
SIM error.
Possible causes Possible solution
On/Off key not pressed long enough.
Flat battery.
Battery contacts dirty.
See also below under
“Charging error”.
Press On/Off key for at least 2 seconds.
Charge battery.
Check charging indicator in the display.
Clean contacts.
Frequent use of organiser and games.
Unintentional keystrokes
(illumination!).
Battery totally discharged.
Restrict use if applicable.
Fast search activated.
Deactivate speed search (p. 94).
Display illumination switched on. Switch off display illumination (p. 77).
Temperature out of range:
+5 °C to +45 °C.
Contact problem
1) Plug in charger cable, battery is on charge.
2) Charge icon appears after approx. 2 hours.
3) Charge battery.
Make sure the ambient temperature is right, wait for a while, then recharge.
Check power supply and connection to the phone. Check battery contacts and telephone connection socket, clean them if necessary, then insert battery again.
No mains voltage.
Use different mains power socket, check mains voltage.
Wrong charger.
Battery faulty.
Only use original Siemens accessories.
Replace battery.
SIM card not inserted correctly. Check that the SIM card is inserted correctly
Dirty SIM card contacts.
SIM card with wrong voltage.
SIM card damaged
(e.g. broken).
Clean SIM card with a dry cloth.
Use 1.8 or 3 V SIM cards only.
Carry out a visual check. Have service provider change the SIM card.
left page (118) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
118 Questions & Answers
Problem Possible causes
No network connection. Weak signal.
Outside GSM range.
Invalid SIM card.
New network not authorised.
Not supported by service provider or registration required.
Phone memory full.
Possible solution
Move higher, to a window or an open space.
Check service provider's coverage area.
Complain to the service provider.
Try manual selection or select a different net-
Network call barring is set.
Network overloaded.
Phone loses network. Signal too weak.
Calls not possible.
Some calls not possible.
Impossible to make entries in Phonebook/
Addressbook.
Voice message not functioning.
ã
flashes to indicate an SMS.
ä
flashes to indicate an MMS.
Check network barrings (p. 92).
Try again later.
Reconnection to another service provider is
automatic (p. 93). Switching phone off and on
again can speed this up.
Second line set.
New SIM card inserted.
Charge limit reached.
Credit used up.
Call restrictions are in place.
Set first line
\
Check for new barrings.
Reset limit with PIN2 (p. 40).
Load credit.
Barrings can be set by service provider. Check
Phonebook/Addressbook is full. Delete entries in the Addressbook/Phonebook
(see standard functions, p. 16).
Call divert to mailbox not set.
SMS memory full.
MMS memory full.
Set call divert to mailbox (p. 59).
Delete SMS messages (see standard functions,
p. 16) or archive them (p. 44).
Delete MMS messages (see standard functions,
å
flashes to indicate an MMS.
Function cannot be set.
Capacity problems with, for example,
Games & More, ringtones, pictures, videos, SMS archive.
No Internet access; downloading not possible.
Phone memory full.
Profile not activated, profile settings wrong/incomplete.
Delete messages, pictures, videos, games or applications.
Contact your service provider.
Delete files in the relevant areas. You can use the memory assistant to delete specific files
Activate or set browser profile (p. 69). If neces-
sary ask your service provider.
left page (119) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
Questions & Answers 119
Problem
Text message cannot be sent.
Possible causes
Service provider does not support this service.
Phone number for service centre not set or incorrectly set.
SIM card contract does not support this service.
Service centre overloaded.
Recipient does not have a compatible phone.
Destination phone does not support the EMS standard.
Possible solution
Contact your service provider.
Contact your service provider.
Repeat message.
Check.
EMS pictures are not displayed on the destination phone.
No Internet access possible.
PIN error/
PIN2 error.
Incorrect browser profile set, or wrong or incomplete settings.
Three wrong entries.
Check browser settings (p. 69), or contact your
service provider.
Enter the PUK (MASTER PIN) supplied with the
SIM card according to the instructions. If you have lost the PUK (MASTER PIN), contact your service provider.
Three wrong entries.
Contact Siemens Service (p. 120).
No authorisation for this service. Contact your service provider.
Phone code error.
Service provider code error.
Too few/too many menu entries.
No fax possible.
Functions may have been added or deleted by the service provider via the SIM card.
Wrong settings in the PC.
Check with your service provider.
No authorisation for this service. Contact your service provider.
Charge meter does not work.
Charge pulse is not being transmitted.
Contact your service provider.
Damage
Severe shock.
Remove battery and SIM and re-insert them. Do not dismantle the phone!
Phone became wet.
Remove battery and SIM. Dry immediately with a cloth, but do not apply heat. Dry connector contacts thoroughly. Stand mobile upright in an air current.
Do not dismantle the phone!
Resetting all settings to factory default, p. 83:
* #9999#
A
डाउनलोड
विज्ञापन
मुख्य विशेषताएं
Black
132 x 176 pixels
MMC
Bluetooth
Multimedia Messaging Service (MMS)
Lithium-Ion (Li-Ion) 750 mAh