Extras. Siemens SP65
Hirdetés
Hirdetés
left page (105) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
Extras 105
Extras
SIM services (optional)
C
¢
S
¢
SIM services
Your service provider may offer special applications such as mobile banking, share prices, etc. via the
SIM card.
If you have such a SIM card, the SIM services will appear in the main menu under “Extras” or directly above the soft key (on the left).
Symbol for SIM services.
U
Where there are several applications, these are displayed in a SIM services menu. With the SIM services menu, your phone can support future additions to your service provider's user package. For further information, please contact your service provider.
Alarm clock
C
¢
S
¢
Alarm clock
The alarm will ring at the time set by you, even when the phone is switched off.
§Edit§ Press to set.
F
Activate/deactivate the alarm.
Switch to time setting.
H
J
C
Set alarm call time
(hh:mm).
Switch to week days.
H
F
Navigate to the various days.
Display options: alarm call time and days.
é
Alarm clock
¹
§On§
07:30
Mo Tu We Th Fr Sa Su
Edit OK
ì
C
Set days for alarm calls.
Press again to delete the highlighting.
Press and hold to highlight/unhighlight all the days.
Confirm setting.
§OK§
Additional information
¹
Screen display in standby mode: alarm clock activated.
Use Snooze to set the alarm to repeat.
left page (106) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
106 Extras
Calc.
C
¢
S
¢
Calc.
The calculator can be used in a basic version and with an advanced range of functions. The input line and two calculation lines (including the matrix with the calculation functions) are located in the top half of the display.
J
F
/
I
J
C
Enter digit(s).
Navigate functions.
Enter digit(s).
Use function. The result is calculated and displayed immediately.
e x
2 x
MS
MR
M+
Basic functions
+, -, *, / Basic calculation types
=
1/x
Result
Reversion
.
% Convert to percentage
Decimal point.
± Sign change “+”/“–”
§Options§ Expansion of the range of
functions:
Square root
Square
Exponent
Save displayed number
Call up saved number
Insert number from memory
Calculator options
§Options§ Open menu.
Convert Call up the unit converter with the current result.
Clear all Delete all units.
Extended mode/
Basic mode
Convert calculation functions.
Memory save,
Memory recall,
Memory clear
Save or recall result; delete memory.
(For standard functions see p. 16)
left page (107) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
Unit converter
C
¢
S
¢
Unit converter
You can convert various measurement units into other measurement units.
The following types are offered with various units:
Velocity
Energy
Mass
Pressure
Time
Volume
Area
Length
Power
Temperature
Currency
Example for Velocity units:
Type
Velocity
Units
Kilometres/h , Metres/sec ,
Miles/h , Miles/sec , Knots ,
Mach
Converting the units/currency
F
Select the source unit/ currency.
Switch to the input field.
H
J
Enter the quantity to be converted.
Extras 107
H
Switch to the selection field.
F
Select the target measurement unit/currency.
The result is displayed.
You can use both input fields alternately.
Special key functions:
Set decimal point.
*
#
Change sign.
Currency
When you call up the function, you must enter a base currency into which the conversions are to be made.
J
§Save§
Enter currency
(e. g. euro).
Store entry.
Now enter the name and exchange rate of the currency to be converted.
§Options§ Open menu.
Add currency Enter new currency and exchange rate.
Set as base Use entered currency as base currency.
Edit rate Change the exchange rate of the base currency.
Calc.
Start calculator.
(For standard functions see p. 16)
left page (108) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
108 Extras
Stopwatch
C
¢
S
¢
Stopwatch
Two intermediate times can be recorded and saved.
Display also in standby mode.
C
Start/stop.
Save intermediate time.
*
After a stop:
C
Reset to zero.
Stopwatch options
§Options§ Open menu.
Stopwatch list Display saved entries.
(For standard functions see p. 16)
Countdown
C
¢
S
¢
Countdown
A set time elapses. The last
3 seconds are indicated by a beep.
At the end a special beep sounds.
Display also in standby mode.
If no time has been entered:
C
Open input window.
Set period of time.
J
C
Confirm.
If a countdown time is specified:
C
Start countdown.
While the time is elapsing:
C
Interrupt counter.
C
Let counter continue running.
§Reset§ Reset counter to starting time.
Sound recorder
C
¢
S
¢
Sound recorder
left page (109) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
Remote synchronisation
C
¢
S
¢
Remote syncr.
You can use this function remotely to access externally filed data
(addresses, calendar, etc.) and synchronise these with the data on your phone. The data can, for example, be saved on a company computer or the Internet e.g.: www.siemens-mobile.com/syncml
Synchronising
§Sync§
§Next§
The computer is selected and synchronisation started. When completed, the actions which have been performed are displayed.
Scroll through the various displays.
Sync. setting
The following settings can be made prior to synchronisation:
Sync. profile
You can choose between 5 profiles.
Select profile.
I
C
Activate profile.
§Edit§
Or
Set profile.
Extras 109
Server sett.
Providers Display the current service provider.
Homepage: e.g. www.siemens-
mobile.com/syncml
Port: Enter port number.
e.g. 80.
Login: Enter user name
(login name).
Password: Enter password (shown as a series of asterisks).
Calendar path
Contacts path
Notes path
Task path e.g. events e.g. contacts e.g. notes e.g. tasks
HTTP authentication:
Confirmation required; Yes /
No (if No , the input fields are not visible).
HTTP name: Enter name.
HTTP password:
Enter password.
left page (110) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
110 Extras
Last sync:
Time of the last synchronisation.
Sync. mode
• Sync data: Modified data or All data
• Sync direction: Two-way ,
Mobile update or Server update
Sync items:
Highlight database areas to be synchronised:
Calendar
Addressbook
Notes
Tasks
C
Save settings.
Device manag.
C
¢
S
¢ Device manag.
If you were informed about software updates by a push message, you can establish a connection to the provider's server using the Device manager, so you can download them.
When downloading is finished, you will be asked to switch the phone off and on again. Afterwards, the software of your phone will be updated.
Please follow instructions in the display.
The phone default setting varies from service provider to service provider:
• The settings have already been implemented by the service provider. You can start immediately.
• Access profiles have already been created by your service provider.
Then select profile and activate.
• The access profiles must be configured manually. If necessary, contact your service provider. You will also find the current settings for the service provider on the Internet at www.siemens.com/ mobilephonescustomercare under "FAQ".
Active profile
A standard profile for downloading the current software of the operating system is displayed.
§Sync§ Establish a connection with the active profile.
Or
§Edit§ Call up profile list.
Select profile.
I
C
Activate profile.
Or
§Edit§ Set profile.
Last connect.
Display last connection.
Letöltés
Hirdetés
Főbb jellemzők
Black
132 x 176 pixels
MMC
Bluetooth
Multimedia Messaging Service (MMS)
Lithium-Ion (Li-Ion) 750 mAh