Features. Sony bravia kdl-32e4000, 3-298-243-13(1), KDL-46W4210, KDL-40W4210, KDL-32W4000, KDL-46W4220, RM ED011, KDL-40E4030, KDL-40E4020, KDL-40E4000

010COV.book Page 24 Wednesday, October 1, 2008 10:51 AM

Reset

Treble

Bass

Resets all the sound settings to the factory settings.

Adjusts higher-pitched sounds.

Adjusts lower-pitched sounds.

Balance

Auto Volume

Emphasizes left or right speaker balance.

Keeps a constant volume level even when volume level gaps occur (e.g., adverts tend to be louder than programmes).

~

If you set “Sound Effect” to “Dolby Virtual”, “Auto Volume” changes to “Off”.

Volume Offset

Dual Sound

Adjusts the volume level of the current input relative to other inputs.

Selects the sound from the speaker for a stereo or bilingual broadcast.

“Stereo/ Mono”: For a stereo broadcast.

“A/ B/ Mono”: For a bilingual broadcast, select “A” for sound channel 1, “B” for sound channel 2, or “Mono” for a mono channel, if available.

z

If you select other equipment connected to the TV, set “Dual Sound” to

“Stereo”, “A” or “B”.

~

“Sound Effect”, “Treble”, “Bass”, “Balance” and “Auto Volume” are not available when “Speaker” is set to “Audio System”.

Features

Quick Start

Power Saving

Light Sensor

The TV turns on faster than usual within two hours after switching to standby mode. However, power consumption in standby mode is higher than usual.

Selects the power saving mode to reduce the power consumption of the TV.

When “Picture Off” is selected, the picture is switched off and the (Picture

Off) indicator on the TV front panel lights up in green. The sound remains unchanged.

“Standard Power”: Default settings.

“Reduced Power”: Reduces the power consumption of the TV.

“Picture Off”: Switches off the picture. You can listen to the sound with the picture off.

“On”: Automatically optimises the picture settings according to the ambient light in the room.

“Off”: Turns off the “Light Sensor” feature.

~

Be sure not to put anything over the sensor, as its function may be affected. See page 12 for the location of the light sensor.

Lights up and turns off the Sony logo on the front of the TV.

Logo Illumination

(except for

KDL-37V4xxx,

KDL-32V4xxx,

KDL-26V4xxx)

24 GB

010COV.book Page 25 Wednesday, October 1, 2008 10:51 AM

Film Mode

Provides an improved picture quality which is optimized for film when playing

DVD images taken on film and non progressive (interlaced).

“Auto”: Detects the picture contents (video or film) and optimizes the picture quality. Use this setting for standard use.

“Off”: Turns off the “Film Mode” feature.

~

• If the image contains irregular signals or too much noise, “Film Mode” will be automatically turned off even if “Auto” is selected.

• “Film Mode” is not available when “Video/ Photo” is set to “Photo” or when photograph is detected if “Video-A” is set.

Video/Photo

Provides suitable image quality by selecting the option depending on the input source (video or photograph data).

“Video-A”: Sets suitable image quality, depending on the input source, video data or photograph data when directly connecting Sony HDMI output-capable equipment that supports “Video-A” mode.

“Video”: Produces suitable image quality for moving pictures.

“Photo”: Produces suitable image quality for still images.

~

• The setting is fixed to “Video” when Video-A mode is not supported on the connected equipment, even if “Video-A” is selected.

• Only available for HDMI 1, HDMI 2, HDMI 3 and Component in format 1080i or 1080p.

x.v.Colour

(except for

KDL-32W4xxx,

KDL-32E4xxx,

KDL-26E4xxx,

KDL-37V4xxx,

KDL-32V4xxx,

KDL-26V4xxx)

Displays moving pictures that is more faithful to the original source by matching the colour space of source.

~

• The setting is fixed to “Normal” when the input signal is HDMI (RGB), even if

“x.v.Colour” is selected.

• Only available for HDMI 1, HDMI 2, HDMI 3 and Component in format 720p,

1080i or 1080p.

Photo Colour Space

(except for

KDL-32W4xxx,

KDL-32E4xxx,

KDL-26E4xxx,

KDL-37V4xxx,

KDL-32V4xxx,

KDL-26V4xxx)

Selects the option (sRGB, sYCC, Adobe RGB) to match the output colour space within the output signal from the equipment connected to the HDMI, component input jacks or USB.

~

• Select “sYCC” when using the equipment that supports “x.v.Colour”.

• Only available for HDMI 1, HDMI 2, HDMI 3 and Component in format 1080i or 1080p.

• Not available when “Colour Space” is set to “Wide” (page 23).

Timer Settings

Sets the timer to turn on/off the TV.

Sleep Timer

Sets a period of time after which the TV automatically switches itself into standby mode.

When the Sleep Timer is activated, the

(Timer) indicator on the TV (front) lights up in orange.

z

• If you switch off the TV and switch it on again, “Sleep Timer” is reset to

“Off”.

• “Sleep timer will end soon. Power will be turned off” appears on the screen one minute before the TV switches to standby mode.

Continued

25 GB