Photo. Sony bravia kdl-32e4000, 3-298-243-13(1), KDL-46W4210, KDL-40W4210, KDL-32W4000, KDL-46W4220, RM ED011, KDL-40E4030, KDL-40E4020, KDL-40E4000

010COV.book Page 32 Wednesday, October 1, 2008 10:51 AM

Photo

Picture Frame

Displays a fixed photograph on the screen for a selected period of time. After that period, the TV automatically switches itself into standby mode.

Using the Options menu

Press

OPTIONS

to display the following options.

Options Description

Image selection Press F/f/G/g to select a photograph, then press to set.

Duration Selects the desired period.

~

• If the photograph is selected from a USB device, it must remain connected to the TV.

• If “Sleep Timer” is activated, the TV automatically will switch into standby mode.

• Picture settings can be modified on the “USB Photo

Viewer” Options menu.

USB Photo Viewer

You can view photographs (in JPEG format) stored in a Sony digital still camera, camcorder through a USB cable or USB storage media on your TV.

1 Connect a supported USB device to the

TV.

2 Press

HOME

.

3 Press G/g to select “Photo”, then press F/ f to select “USB Photo Viewer” and press

.

The thumbnail screen appears.

4 Press F/f/G/g to select the photograph or folder you want to view, then press .

5 Press

RETURN

to go back to thumbnail screen.

Additional operations

Press G/f to select an option, then press .

Options Description

Device Selection Press G/g to select a device when multiple devices are connected. Bravia images are predefined device.

Options

Slide Show

Set-up

Description

Displays the photographs one by one.

You can make advanced settings for a slide show, and set the display sequence of the thumbnails.

Using the Options menu

Press

OPTIONS

to display the following options.

Options

Picture Mode

Description

See page 22.

Sleep Timer

Power Saving

See page 25.

See page 24.

z

Not available on thumbnail screen and “Slide Show” option.

~

• USB photo viewer supports DCF-compliant JPEG photographs only.

• When you connect a Sony digital still camera, set the camera’s USB connection mode to Auto or “Mass

Storage”. For more information about USB connection mode, refer to the instructions supplied with your digital camera.

• USB Photo Viewer supports FAT32 file system only.

• While the TV is accessing the data on the recording media, observe the following:

– Do not turn off the TV or connected USB device.

– Do not disconnect the USB cable.

– Do not remove the recording media.

The data on the recording media may be damaged.

• Do not use unsupported USB device. This may cause malfunctions.

• Sony will not be held liable for any damage to, or loss of, data on the recording media due to a malfunction of any connected devices or the TV.

• Check the website below for updated information about compatible USB devices. http://support.sony-europe.com/TV/compatibility/

32 GB