advertisement
Firmware User
’s Manual V6.04.15
Live View
This section describes how to configure the IP camera. The administrator has unlimited access to all settings, while the normal user can only view live video.
Login
Initially there exists only administrator ’s account in the camera (Account: Admin, Password:
123456) – you have to use that account to log in.
You can later create normal user accounts with limited access rights if necessary.
Feel free to choose your local language from the list of languages or keep it as English. After pressing
“Login”, you will be able to access the user interface of Web Configurator.
Upon successful login, you will be able to see the Live View page. In case of
Internet Explorer browser , you may be prompted to allow the installation of
ActiveX control from the camera. Press “Install” then. The live video will appear shortly after that.
advertisement
Related manuals
advertisement
Table of contents
- 5 Connect the Equipment
- 5 Configure the IP Addresses
- 9 Access the Camera
- 11 Login
- 12 Live View
- 15 ePTZ View Mode
- 15 Panorama View Mode
- 16 Fisheye View Mode
- 17 Access the Setup Page
- 19 Date & Time
- 21 Network
- 21 IP Address Filtering
- 23 Port Mapping
- 24 HTTPS
- 25 IEEE 802.1X
- 27 SNMP Setting
- 30 Network (ToS, UPnP, Bonjour, ONVIF)
- 33 IP Settings
- 33 Connection Type
- 39 Video
- 41 Compression
- 44 Motion Detection
- 49 Day/Night
- 50 Image
- 51 Exposure / White Balance
- 55 OSD/Privacy Mask
- 58 On-Screen Graphics
- 60 Audio
- 61 Event
- 61 Event Server
- 64 Event Configuration
- 70 Event List
- 73 Manual Event
- 74 Local Storage Management
- 75 Status
- 76 Utilities
- 81 Setup
- 82 File Management
- 88 Event Handler with Local Storage
- 95 System
- 95 User Account
- 96 System Info
- 97 Factory Default
- 98 Firmware Upload
- 99 Save & Reboot
- 100 Logout