Program sequence indicator lights. Miele G811

Operating the dishwasher

Program sequence indicator lights (15)

The “Rinse” indicator light comes on in the Prewash, Main wash, Interim rinse and Final rinse stages of a program.

The “Drying” indicator light comes on during the drying stage of a program.

The “End” indicator light comes on when the program has finished.

Turning off the dishwasher

At the end of a program:

^ Turn the program selector (17) to

“Stop”.

The “End” indicator light (15) goes out and the “Start” indicator (18) lights.

^ Press the “On/Off” button (14).

The “Start” indicator light (18) goes out.

At the end of a program

A program has finished when the “End” indicator lights (15) in the program sequence display.

The dishwasher can now be opened and unloaded (see “Unloading the dishwasher”).

If the dishwasher is not opened, the fan will continue for a few minutes to remove any remaining moisture. This process is not part of the program.

Only open the door immediately after a program has ended if dishes or cutlery are urgently needed.

Turn off the dishwasher if another program is not going to be started immediately.

The dishwasher continues to use electricity until turned off using the

“On/Off” button.

If the dishwasher is not to be used for a long period of time, e. g. while on vacation, the water valve should be turned off.

31