Increasing the water intake time. Miele G811

Solving problems

Increasing the water intake time

To increase the water intake time, proceed as follows:

^ Turn off the dishwasher using the

”On/Off” button.

^ Turn the program selector to “Stop”.

^ Press the “Top Solo” button while simultaneously turning the machine

“On”. Release the “Top Solo” button within 2 seconds. The “Salt - PC” indicator light should blink.

If any other lights are blinking, repeat the process.

^ Turn the program selector to

“Economy 55 °C/130 °F”.

– If the “Top Solo” indicator does not light, the water intake time is set to normal.

– If the “Top Solo” indicator lights, the increased water intake time is set.

^ To change the setting, press the “Top

Solo” button.

The “Top Solo” indicator light will illuminate or go out each time the button is pressed.

^ Turn the program selector to “Stop”.

^ Turn off the dishwasher.

The modified intake time is now stored.

48