Interrupting a program. Miele G811

Operating the dishwasher

Interrupting a program

A program is interrupted as soon as the door is opened.

If the door is closed again, the program will continue from the point it was at before the door was opened.

Warning:

Water in the dishwasher may be hot. There is a danger of being burned!

Only open the door if absolutely necessary and with caution. Before closing the door, leave it open for approximately 20 seconds. This will allow the temperature in the wash cabinet to settle.

Close the door firmly until it clicks into place.

Changing a program

If a program has already started and you wish to change it proceed as follows:

^ Turn the program selector (17) to the

“Stop” position.

^ Leave the program selector (17) in this position for at least one second.

^ Then turn the program selector (17) to the program you wish to use.

^ Press the “Start” button (18).

The program starts.

32