Checking the water level. Miele G811

Solving problems

If the water pressure is less than 15 psi, not enough water will flow into the wash cabinet.

^ To check the water level, open the water valve completely and run the

“Rinse & Hold” program once (without dishes), to bring water into the system.

^ Run the “Rinse & Hold” program again. After approximately 3 minutes, open the door and remove the lower basket from the machine.

The water level is correct when dimension “ X ” is at least 1/8" (4 mm).

^ If it measures less, the water intake time must be increased (see the following page).