Delete. Remote Automation Solutions OpenEnterprise OPC Client RDI

Reference Guide

D301518X412

April 2012

OPC Client RDI Configuration

1.3.11 Delete

This option allows you to delete the selected node, the database entry that it represents and any dependant configuration - e.g. if an OPC Group entry is deleted, then all OPC Items that reference that Group will be deleted also. A confirmation dialog will require you to confirm the deletion before it takes place. At this stage it is possible to abort the deletion by selecting the [No] button. If the [Yes] button is selected, the deletion takes place immediately.

1.3.12 Close Button

When selected, the OPC Client RDI configuration tool will close immediately.

1.4 The Configuration Dialogs

There are five main configuration dialogs presented for configuring the OPC Client RDI. They are:

1. The OPC Driver Dialog

2. The OPC Server Dialog

3. The OPC Device Dialog

4. The OPC Group Dialog

5. The OPC Item Dialog

1.4.1 OPC Driver Dialog

The

OPC

Driver Dialog enables you to configure additional OPC Drivers, should you need to.

1.4.1.1 OPC Driver Name

The

OPC

Driver name must be unique within the OPCDriver table.

- 7 -