Step 3 - Select Device-based Manual option. Remote Automation Solutions OpenEnterprise OPC Client RDI

Reference Guide

D301518X412

April 2012

OPC Client RDI Configuration

1.4.6.3.1.3 Step 3 - Select Device-based Manual option

This dialog is displayed only if the Get Tags command has been selected from a Server or Device node within the OPC Client RDI configuration tool. The Device-based Hierarchy - Manual option should be selected from the Multiple OPC Tag Selection dialog.

1.4.6.3.1.4 Step 4- Add OPC Item Dialog

Because the Get Tags context menu was selected from a Device node, the single Device which we configured in the configuration tool is already selected in the OPC Device list, and the New button is disabled. If we had chosen the Get Tags context menu from the Server node, the configured Device would have been in the list but another entry would also have been inserted into the list for selection, and the New button would be enabled. The OPC Group list is populated with the first Group found within the OPC Server. The Add OPC Item dialog presents us with each OPC Group found in the multiple tag selection in turn.

- 25 -