Returning conditions. Fagor CNC 8055 for lathes, CNC 8055, CNC 8055 for other applications
Add to My manuals210 Pages
advertisement
RETURNING CONDITIONS
When sending the central nit or the remote modules, pack them in its original package and packaging material. If you do not have the original packaging material, pack it as follows:
1.
Get a cardboard box whose 3 inside dimensions are at least 15 cm (6 inches) larger than those of the unit itself. The cardboard being used to make the box must have a resistance of 170 kg. (375 pounds).
2.
Attach a label indicating the owner of the unit, person to contact, type of unit and serial number.
3.
In case of failure, also indicate the symptom and a short description of the failure.
4.
Protect the unit wrapping it up with a roll of polyethylene or with similar material.
5.
When sending the central unit, protect especially the screen.
6.
Pad the unit inside the cardboard box with polyurethane foam on all sides.
7.
Seal the cardboard box with packaging tape or with industrial staples.
CNC 8055
CNC 8055i
·19·
CNC 8055
CNC 8055i
·20·
advertisement
Key Features
- Advanced contouring capabilities with support for up to 5 axes of simultaneous motion
- Powerful macro programming language for creating custom cycles and routines
- Intuitive graphical user interface for easy programming and operation
- Remote monitoring and diagnostics for increased uptime and productivity
- Comprehensive range of I/O options for flexible connectivity
Related manuals
Frequently Answers and Questions
What is the maximum number of axes that the Fagor CNC 8055 can control?
Does the Fagor CNC 8055 support macro programming?
Is the Fagor CNC 8055 easy to use?
Can the Fagor CNC 8055 be monitored and diagnosed remotely?
What types of I/O options are available for the Fagor CNC 8055?
advertisement