Definition of spindle conditions. Fagor CNC 8055 for lathes, CNC 8055, CNC 8055 for other applications

3.

CNC 8055

CNC 8055i

·TC· O PTION

S OFT : V02.2

X

Operating manual

3.1.1

Definition of spindle conditions

Work mode (RPM) or (CSS)

Place the cursor on the "RPM" or "CSS" icon. To do this, use the [CSS] key or the [



] [



] [



] [



] keys.

CSS m / min

> / < ] [

Once the data has been selected, press the [CSS] key or the two-color key to change the work mode.

Spindle range

Place the cursor over this data, key in the desired value and press [ENTER].

In cycles using a live tool:

Icon for selecting the spindle gear to be used for machining cycles where a live tool is used. Its possible values are:

Value 0:

Value 1:

Value 2:

Value 3:

Value 4:

Gear corresponding to the S value

Gear 1

Gear 2

Gear 3

Gear 4

Maximum spindle speed (S) in rpm

Place the cursor over this data, key in the desired value and press [ENTER].

Spindle turning direction

There are two ways to select the spindle turning direction.

*

Place the cursor on this data and press the two-color key to change the icon.

Start the spindle in the desired direction with the JOG keys. The CNC starts the spindle and assumes that turning direction as spindle turning data for the cycle.

Coolant

There are two ways to turn the coolant on or off.

*

Place the cursor on this data and press the two-color key to change the icon.

Turns the coolant on. The CNC outputs the M8 function to the PLC.

Turns the coolant off. The CNC outputs the M9 function to the PLC.

Once the operation or the cycle is completed or the part-program it belongs to, the CNC outputs the M9 function to the PLC.

·78·