Tool inspection. Fagor CNC 8055 for lathes, CNC 8055, CNC 8055 for other applications
Add to My manuals210 Pages
advertisement
7.
CNC 8055
CNC 8055i
Operating manual
7.4.1
Tool inspection
The PLC mark M5050 "TOOLINSP" determines when tool inspection is enabled.
TOOLINSP=0 Tool inspection is possible after pressing [STOP].
TOOLINSP=1 Pressing [STOP] interrupts the execution of the program. To move the axes and do a tool inspection, press the [T] key once the execution of the program has been interrupted.
Once tool inspection has been selected, it is possible:
• To move the axes to the tool change point.
• Select another tool.
• To modify the tool values.
• To resume program execution.
To move the axes to the tool change point.
To move the axes with the handwheels or the jog keypad to the point where the tool will be changed.
Select another tool.
The standard screen of the TC mode must be selected in order to be able to make a tool change.
Press the [T] key. The CNC highlights the tool number.
Type in the number of the tool to be selected and press [START] so the CNC selects the new tool. The CNC will manage the tool change.
Modifying the tool values (dimensions and geometry).
Press the key associated with tool calibration. The CNC shows the screen for tool calibration.
It is possible to modify the dimensions of the tool (offsets I, K to compensate for wear) or the values for tool geometry.
Press the [ESC] key to exit this screen and go back to the previous one (still in tool inspection).
Resuming program execution.
Press the [START] key to resume program execution. The CNC will reposition the tool by moving it to the point where tool inspection began.
There may be 2 cases; either only one axis moved or several did.
• Only one axis moved.
The CNC repositions it and resumes the execution.
• Both axes moved.
The CNC will show a window with the following options to choose the order the axes will be repositioned.
PLANE
Z-X
X-Z
The axes of the X-Y plane move at the same time.
When moving the axes of the plane, the Z axis moves first and then the X.
When moving the axes of the plane, the X axis moves first and then the Z.
·TC· O PTION
S OFT : V02.2
X
·202·
advertisement
Key Features
- Advanced contouring capabilities with support for up to 5 axes of simultaneous motion
- Powerful macro programming language for creating custom cycles and routines
- Intuitive graphical user interface for easy programming and operation
- Remote monitoring and diagnostics for increased uptime and productivity
- Comprehensive range of I/O options for flexible connectivity
Related manuals
Frequently Answers and Questions
What is the maximum number of axes that the Fagor CNC 8055 can control?
Does the Fagor CNC 8055 support macro programming?
Is the Fagor CNC 8055 easy to use?
Can the Fagor CNC 8055 be monitored and diagnosed remotely?
What types of I/O options are available for the Fagor CNC 8055?
advertisement