Connecting using an Optical Cable. Samsung HW-N300

05 CONNECTING TO A TV

Hear TV sound from your Soundbar through wired or wireless connections.

• When the Soundbar is connected to selected Samsung TVs, you can control the Soundbar using the

TV’s remote control.

– This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable.

– This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute.

Connecting using an Optical Cable

Step 1. Connect an Optical Cable

OPTICAL OUT Optical Cable

(not supplied)

DIGITAL AUDIO IN

(OPTICAL)

USB (5V 0.5A)

NOTE

– When the audio in a broadcast is encoded in Dolby Digital and the “Digital Output Audio Format” on your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the setting on the TV is changed, you will experience better sound quality. (The TV menu may use different words for Dolby Digital and PCM depending on the TV manufacturer.)

ENG - 13

Step 2. Change the Soundbar’s mode to D.IN

W

(OR)

Right Side of the Soundbar

Auto Power Link

This Function automatically turns on the Soundbar when the TV is turned on if the Soundbar is connected to the TV by an Optical Cable (not supplied).

Press the button on the remote control to turn on this function.

• Auto Power Link is set to ON by default. (To turn off this function, press the remote control.)

• Depending on the connected device, Auto Power Link may not function.

• This function is only available in the “ D.IN

” mode.

button on the

Mode Remote control Button

OFF

LED indicator

Blinking

W W R

ON

Blinking

W W G

ENG - 14