Connecting a TV or Bluetooth Device via Bluetooth. Samsung HW-N300

Connecting a TV or Bluetooth Device via Bluetooth

Step 1. Change the Soundbar mode to “Bluetooth Pairing”

5 Sec

Fast-Blinking

B

Step 2. Select the Soundbar in your TV’s or Bluetooth device’s Menu

Bluetooth menu

(OR)

Select

“[AV] Samsung Soundbar Nxxx N-Series”

Bluetooth device

NOTE

– You cannot connect more than one TV or Bluetooth device at a time.

Step 3. Check the Soundbar’s status

The blue LED should not be blinking once the Bluetooth connection is complete.

B

If the TV or device fails to connect

• If a previously connected Soundbar listing appears in the device list of your TV or Bluetooth device, delete it. (e.g. “ [AV] Samsung Soundbar Nxxx N-Series ”)

• Then repeat steps 1 through 3.

ENG - 15

Disconnecting the Soundbar from the TV

Press the

“ Bluetooth ”.

button on the right side panel or on the remote control and switch to any mode but

• Disconnecting takes time because the TV must receive a response from the Soundbar.

(The time required may differ, depending on the TV model.)

• To cancel the automatic Bluetooth connection between the Soundbar and TV, press and hold

button for 5 seconds in “ Bluetooth ” mode. TV Connect is turned OFF.

• To turn TV Connect back on, press and hold the

“ Bluetooth ” mode.

button for 5 seconds with the Soundbar in

• TV Connect is set to ON by default.

Mode Remote control Button LED indicator

TV Connect-OFF

5 Sec

Blinking

B W W R

TV Connect-ON

5 Sec

Blinking

B W W G

NOTES

– If asked for a PIN code when connecting a Bluetooth device, enter <0000>.

– In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the

Soundbar and the Bluetooth device exceeds 10 meters.

– The Soundbar automatically turns off after 5 minutes in the Ready state.

– The Soundbar may not perform Bluetooth search or connection correctly under the following circumstances:

– If there is a strong electrical field around the Soundbar.

– If several Bluetooth devices are simultaneously paired with the Soundbar.

– If the Bluetooth device is turned off, not in place, or malfunctions.

– Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.

ENG - 16