Trusted subnet. Watchguard XCS

Intercept Anti-Spam

Trusted subnet

To specify a network interface as trusted or untrusted, perform the following steps:

1. Select Configuration > Network > Interfaces .

2. For the specified interface, enable or disable the Trusted Subnet check box.

The Trusted Subnet setting should not be used if the system is deployed internally or behind a network firewall.

Trusting via specific access patterns

To trust a system with a specific access pattern:

1. Select Configuration > Mail > Access .

2. For Specific Access Patterns, click Add Pattern .

3. Enter the IP address or hostname of the system in the Pattern field.

4. Select the Client Access check box.

5. Select Trust from the If pattern matches drop-down list.

6. Click Apply .

User Guide 165