Connect the Router. Linksys WRT54G, wrt54g3g at router

2

There are two ways to configure the Router. Choose one of the following:

• Run the Setup CD-ROM - Insert the Setup CD-ROM into the CD-ROM drive, and follow the on-screen instructions.

•Use this Quick Installation guide - If you wish, you can use the Router’s

Web-based Utility. Proceed to Step 1 of this Quick Installation.

1

Connect the Router

A

Power down your network devices.

B

Locate an optimum location for the Router. The best place for the Router is usually at the center of your wireless network, with line of sight to all of your mobile stations.

C

Fix the direction of the antennas. Normally, the higher you place the antennas, the better the performance will be.

D

Connect a standard Ethernet network cable to the Router’s

Internet port. Then connect the other end of the network cable to your broadband modem.

E

Connect your computers or

Ethernet devices to the

Router’s numbered ports using standard Ethernet network cabling.

D

E

F

Power on the broadband modem.

G

Connect the AC power adapter to the Router’s Power port and the other end into an electrical outlet.

H

Power on the PC you wish to use to configure the Router.

Proceed to Step 2.

G

IMPORTANT: Make sure you use the power adapter that is supplied with the Router. Use of a different power adapter could damage the Router.

3