advertisement
▼
Scroll to page 2
of
64
Before using for the first time
Rinse aid indicator
The Rinse aid indicator light on the fascia comes on when the rinse aid reservoir needs to be replenished.
^
Add rinse aid only until it is visible on the surface of the filter in the opening.
The rinse aid reservoir holds approx.
130 ml.
^ Close the flap firmly so that it clicks into place. Otherwise water would enter the rinse aid reservoir during a programme.
^ Wipe up any spilled rinse aid. This prevents over-foaming occuring during the next programme.
When the light comes on the reservoir still contains sufficient rinse aid for 2 - 3 programmes.
^ Add rinse aid in plenty of time.
19
advertisement
Key Features
- 3D cutlery tray
- Perfect GlassCare system
- QuickPowerWash
- EcoPower technology
- AutoOpen drying
- Integrated water softener
Related manuals
Frequently Answers and Questions
How do I use the Perfect GlassCare system?
The Perfect GlassCare system is activated automatically when you select the Delicates or Glass programs. It uses a lower water temperature and a gentler water spray to protect delicate glassware.
How do I clean the filters?
The filters should be cleaned regularly to ensure optimal cleaning performance. To clean the filters, remove the bottom basket and pull out the filter assembly. Rinse the filters under running water and replace them in the dishwasher.
How do I start a programme?
To start a program, first select the desired program using the control panel. Then, press the Start button to begin the cycle.
advertisement