advertisement
▼
Scroll to page 2
of
64
Cleaning and care
Cleaning the spray arms
Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be inspected and cleaned regularly (approx. every
4 - 6 months).
^
Switch the dishwasher off beforehand.
Remove the spray arms as follows:
^ Take out the cutlery tray.
^
Press the top spray arm upwards to engage the inner ratchet. Then unscrew the spray arm.
^ Remove the lower basket.
^
Pull the lower spray arm firmly upwards to remove it.
^
Lift up the middle spray arm b to engage the ratchet. Then unscrew the spray arm b
.
^ Use a pointed object to push food particles into the spray arm jets.
^
Rinse thoroughly under running water.
^ Replace the spray arms and check that they rotate freely.
40
advertisement
Key Features
- 3D cutlery tray
- Perfect GlassCare system
- QuickPowerWash
- EcoPower technology
- AutoOpen drying
- Integrated water softener
Related manuals
Frequently Answers and Questions
How do I use the Perfect GlassCare system?
The Perfect GlassCare system is activated automatically when you select the Delicates or Glass programs. It uses a lower water temperature and a gentler water spray to protect delicate glassware.
How do I clean the filters?
The filters should be cleaned regularly to ensure optimal cleaning performance. To clean the filters, remove the bottom basket and pull out the filter assembly. Rinse the filters under running water and replace them in the dishwasher.
How do I start a programme?
To start a program, first select the desired program using the control panel. Then, press the Start button to begin the cycle.
advertisement