Detergent. Miele G 611 Plus

Add to My manuals
64 Pages

advertisement

Detergent. Miele G 611 Plus | Manualzz

Operating the dishwasher

Detergent

,

Only use detergents formulated for domestic dishwashers. Do not use washing up liquid.

^ You can use conventional powder detergent, tablets or liquid dishwasher detergent.

Refer to the dosing instructions given by the manufacturer on the packaging.

^ Put powder or liquid detergent into the dispenser compartment.

^

Detergent tablets should only be put into compartment II if this is recommended by the manufacturer.

If the manufacturer recommends inserting tablets in the cutlery basket do not do so. Instead place them on the inside of the door or directly into the wash cabinet to help them dissolve properly.

Detergent manufacturers give the required amount of detergent for a particular programme on their packaging.

^ Use at least 20 ml of detergent for a full load in the following programmes:

- Intensive;

- Universal plus,

- Universal,

- Normal,

- Economy.

If the manufacturer recommends a larger amount of detergent, use the amount recommended.

Failure to dispense the recommended amount of detergent may impair cleaning results.

If you are using 2 in 1 or 3 in 1 combination tablets, please continue to replenish the salt and rinse aid reservoirs as described in this booklet.

Otherwise the cleaning and drying performance of the machine may deteriorate over time.

28

advertisement

Key Features

  • 3D cutlery tray
  • Perfect GlassCare system
  • QuickPowerWash
  • EcoPower technology
  • AutoOpen drying
  • Integrated water softener

Related manuals

Frequently Answers and Questions

How do I use the Perfect GlassCare system?
The Perfect GlassCare system is activated automatically when you select the Delicates or Glass programs. It uses a lower water temperature and a gentler water spray to protect delicate glassware.
How do I clean the filters?
The filters should be cleaned regularly to ensure optimal cleaning performance. To clean the filters, remove the bottom basket and pull out the filter assembly. Rinse the filters under running water and replace them in the dishwasher.
How do I start a programme?
To start a program, first select the desired program using the control panel. Then, press the Start button to begin the cycle.