Interrupting a programme. Miele G 611 Plus

Operating the dishwasher

Interrupting a programme

A programme is interrupted as soon as the door is opened.

If the door is closed again, the programme will continue from the point it was at before the door was opened.

,

Water in the dishwasher may be hot. Danger of scalding!

Only open the door if absolutely necessary and exercise extreme caution when doing so. Before closing the door again, leave it ajar for approx. 20 secs. This will enable the temperature in the wash cabinet to settle. Close the door firmly making sure that it clicks into place.

Changing a programme

Important:

If the detergent dispenser flap has already opened, do not change the programme.

If a programme has already started and you wish to change it proceed as follows:

^ Turn the programme selector (16) to the "Stop" position.

^ Leave the programme selector (16) in this position for at least one second.

^

Then turn the programme selector

(16) to the programme you wish to use.

^

Select additional function "Top Solo" again if wished (see "Additional functions").

^ Press the "Start" button (17).

The programme cycle begins.

33