advertisement
▼
Scroll to page 2
of
25
INSTALLATION
Waste Bin Sensor Trigger
Install the waste bin trigger onto waste bin; make sure the trigger is fastening tight and secure for engagement with waste bin sensor correctly.
Waste Bin
Slide the waste bin into the slot. Make sure waste bin is all the way inside.
Stack Tray
Hook the tray onto the mounting slot on the machine according to page 7 of stacking tray setting up for business card or greeting card
Power Cord
Use caution when plug in power cord.
Plug power cord to the machine and plug the other end into the wall outlet.
Page 8
Mounting
Slot
advertisement
Key Features
- High-precision cutting up to 297 mm (11.7")
- Automatic creasing and slitting functions
- Intuitive touchscreen control panel for easy operation
- Pre-defined job settings for quick and efficient setup
- Adjustable crease skew for accurate alignment
- Automatic waste bin emptying for uninterrupted workflow
- FCC Class A certified for safe operation in commercial environments
Related manuals
Frequently Answers and Questions
What types of paper can the CC-229 cut?
The CC-229 can cut a wide range of paper materials, including bond paper, coated paper, and cardstock.
How do I set up a pre-defined job?
To set up a pre-defined job, simply select the desired job from the touchscreen control panel and follow the on-screen prompts.
How do I adjust the crease skew?
To adjust the crease skew, use the dedicated knob on the front of the machine to align the crease with the desired position.
What is the maximum cutting length of the CC-229?
The maximum cutting length of the CC-229 is 297 mm (11.7").
How do I empty the waste bin?
To empty the waste bin, simply pull out the bin from the front of the machine and discard the waste paper.