advertisement
▼
Scroll to page 2
of
25
EMPTY THE WASTE BIN
The cutter display waste bin full warning when the sheet count is reached 80.
1.
Remove waste and empty it.
2.
Then place waste back into position.
3.
Press
RESET COUNTER
to clear error.
Hold for 2 seconds the counter to clear counter.
CLEAR JAM
In case jam occurs in the machine follow these steps to clear jam.
1.
Power down the machine and pull paper toward feed tray.
2.
Press or need to be removed.
to move the jam piece toward the exit. Crease and slitter module might
3.
If necessary, depending on location of jam occurs, open the corresponding cover or covers. If jam persists, refer to “ Error Message and Trouble Shooting Guide”.
4.
After clearing the jams, press to clear all errors.
Page 23
advertisement
Key Features
- High-precision cutting up to 297 mm (11.7")
- Automatic creasing and slitting functions
- Intuitive touchscreen control panel for easy operation
- Pre-defined job settings for quick and efficient setup
- Adjustable crease skew for accurate alignment
- Automatic waste bin emptying for uninterrupted workflow
- FCC Class A certified for safe operation in commercial environments
Related manuals
Frequently Answers and Questions
What types of paper can the CC-229 cut?
The CC-229 can cut a wide range of paper materials, including bond paper, coated paper, and cardstock.
How do I set up a pre-defined job?
To set up a pre-defined job, simply select the desired job from the touchscreen control panel and follow the on-screen prompts.
How do I adjust the crease skew?
To adjust the crease skew, use the dedicated knob on the front of the machine to align the crease with the desired position.
What is the maximum cutting length of the CC-229?
The maximum cutting length of the CC-229 is 297 mm (11.7").
How do I empty the waste bin?
To empty the waste bin, simply pull out the bin from the front of the machine and discard the waste paper.