PREVENTATIVE MAINTENANCE. CMI/MPH INTOXILYZER 5000

PR;;YENTATIYE ·MAINTENANCE

1.

2.

3.

4.

5.

6.

To . assure adequate clearance and ventilation, locate the instrument at least one inch away from a back wall and on a hard surface (not on a surface covered with a rug-like material. )

Keep the instrument away from extremes of temperature.

The instrument's operational temperature range is 68 degrees F to 86degreesF (20 degreesC to 30 degrees Cli storage temperature range is ';'20 degreesF to 140 degrees F (-29 degrees C to 60 degrees C).

Keep the instrument clean .and

away from dust; a glass cleaner can be used to clean the instrument's outer surface.

You can purchase an optional dustcover by ordering Part #

011111.

(see "ACCESSORIES;" page 61.) Power to the instrument should be OFF while the dust cover is in use.

To prevent unnecessary wear of the instrument's mechanical parts, turn the instrument OFF when not in use for long periods of time.

If the INTOXILYZER instrument is used frequently (once every 24 hours), the unit should be left

ON, but only if i t ' s in a very clean environment (Minimum dust, smoke, etc.).

Do not place heavy objects on top of the instrument.

Approximately.every

2 years, a qualified service technician should replace the clock battery on·theCPU ~oard.·

/-J

, j

I

I

I

I

I

I

I

I

5;;RYICE

The only user-serviceable parts of the instrument are the fuse and power cord.

Intoxilyzer 5000R

I

I

I

I

I

I

•

I