advertisement
Operating the Dishwasher
Before you begin
Using the Touch Pad Controls
Your new dishwasher is equipped with the latest control technology featuring CLEAR TOUCH™ activation.
In order to activate a button, place the entire fingertip over the desired button and hold it in place for three seconds. This three-second hold is intended to prevent accidental activation.
Selecting a Language
Before using your new dishwasher you must select a language.
Open the door far enough to expose the controls and press the ON/OFF button to turn the unit on.
The first time you turn on the dishwasher, the language selection screen (see above,
Dishwasher Controls, Buttons and Display ) will appear.
The available languages are:
1. AE = American English
2. CF = Canadian French
3. MS = Mexican Spanish
The language abbreviation “AE” will be flashing. If you want a different language press – or + until the desired language flashes.
Save the selected language by pressing the
MENU/OK button.
If you select the wrong language:
1. Press the MENU/OK button seven times to activate the language selection screen
2. If you change to a different language, press the MENU/OK to save.
3. In the Options Step Down Menu you can return to the main menu at any time by pressing the START button.
See the Selecting Dishwasher Options section of this manual for more information on selecting a language.
Dishwasher Control, Buttons and Display
Selecting a Wash Cycle
After adding detergent and rinse aid as explained in the Adding Detergent and Rinse Aid section of this manual, turn the dishwasher on by pressing the ON/OFF button. The display will indicate the default cycle, “Auto Wash”.
If you did not add rinse aid, the display will indicate “Refill Rinse Aid.” To bypass this screen press the MENU/OK button.
To select a different cycle press + or – until the display shows the desired wash cycle.
To avoid damage to delicate or heirloom items do not wash them in your dishwasher.
Always make sure your dishware is dishwasher safe. Refer to the Dishware Materials section of this manual for guidance.
Wash Cycle Selections
Wash cycles accessible from this menu include:
Auto Super Wash
Cleans items having baked–on or hard dried-on food soils. These items may require soaking or hand scouring.
Auto Wash (default cycle)
Cleans large loads with loosely attached food soils.
Auto Delicate Wash
Cleans delicate or heirloom dishware and silverware, or other special items. Hand washing may be the best for such items.
Party Wash
Cleans lightly soiled dishes and reduces overall wash time. Use this cycle to clean glasses and desert dishes that may need to be re-used at the same event.
Rinse and Hold
Allows you to rinse the food soil off of a partial load and hold them in the dishwasher until there is a full load.
9
advertisement