Know Your Pressure Washer. Briggs & Stratton 2050PSI, CleanShot 020206-0, CLEANSHOT 2050PSI

CleanShot™ 2050 PSI Pressure Washer

KNOW YOUR PRESSURE WASHER

Read this owner’s manual and safety rules before operating your pressure washer.

Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.

Recoil Starter

Air Cleaner

Primer Bulb

High Pressure Outlet

& Water Inlet

Fuel Tank

Air Cleaner — Dry type filter element limits the amount of dirt and dust that gets in the engine.

Automatic Cool Down System — Cycles water through pump when water reaches 125°-155°F. Warm water will discharge from pump onto ground.This

system prevents internal pump damage.

Fuel Tank — Fill tank with regular unleaded fuel.

High Pressure Hose (not shown) — Connect one end to water pump and the other end to spray gun.

High Pressure Outlet — Connection for high pressure hose.

Pump equipped with

Automatic Cool Down System

Data Tag (not shown, near rear of base plate) –

Provides model and serial number of pressure washer.

Please have these readily available if calling for assistance.

Primer Bulb — Prepares a cold engine for starting.

Pump — Develops high water pressure.

Recoil Starter — Used for starting the engine manually.

Spray Gun (not shown) — Controls the application of water onto cleaning surface with trigger device. Includes safety latch.

Water Inlet — Connection for garden hose.

5