2.4 Setting Up the Printer. The Speaker Company TTP-2410M Pro, 644M Pro, 346M Pro
Add to My manuals92 Pages
advertisement
▼
Scroll to page 2
of
92
![2.4 Setting Up the Printer. The Speaker Company TTP-2410M Pro, 644M Pro, 346M Pro | Manualzz 2.4 Setting Up the Printer. The Speaker Company TTP-2410M Pro, 644M Pro, 346M Pro | Manualzz](http://s3.manualzz.com/store/data/059537457_1-1d1553dcb88c7154a25e7513a01a9169-360x466.png)
2.3.3 Front Panel Keys
Keys Function
1. Enter the menu
2. Exit from a menu or cancel a setting and return to the previous menu
Pause/Resume the printing process
Advance one label
Scroll up the menu list
Scroll down the menu list
Enter/Select cursor located option
2.4 Setting Up the Printer
1. Place the printer on a flat, secure surface.
2. Make sure the power switch is off.
3. Connect the printer to the computer with the provided USB cable.
4. Plug the power cord into the AC power cord socket at the rear of the printer, and then plug the power cord into a properly grounded power outlet.
Note:
Please switch OFF printer power switch prior to plug in the power cord to printer power jack.
15
advertisement
Related manuals
advertisement
Table of contents
- 6 1.1 Product Introduction
- 7 1.2 Product Features
- 10 1.3 General Specification
- 10 1.4 Print Specifications
- 11 1.5 Ribbon Specifications
- 12 1.6 Media Specifications
- 14 2.1 Unpacking and Inspection
- 15 2.2 Printer Overview
- 19 2.3 Operator Controls
- 20 2.4 Setting Up the Printer
- 21 2.5 Loading Ribbon
- 25 2.6 Loading the Media
- 37 2.7 Adjustment Knob
- 39 Pro/TTP-344M Pro models)
- 41 3.1 Setup Menu Overview
- 70 3.2 File Manager
- 72 3.3 Diagnostics
- 74 3.4 Language
- 75 3.5 Service
- 77 4.1 Start the Diagnostic Tool
- 79 Pro/TTP-344M Pro models)
- 79 5.1 Using USB interface to setup Ethernet interface
- 80 5.2 Using RS-232 interface to setup Ethernet interface
- 81 5.3 Using Ethernet interface to setup Ethernet interface
- 83 6.1 Common Problems
- 87 6.2 Mechanism Fine Adjustment to Avoid Ribbon Wrinkles