Creating a new database. SKF Baker AWA-IV 4 kV, Baker AWA-IV 12 kV, Baker AWA-IV 12 HO, Baker AWA-IV Series, Baker AWA-IV 2 kV

Baker AWA-IV software overview

Creating a new database

There are three ways to create a new database: click on the radio button upon entering the software, click on File --> New while using the software, or click on the new database icon while using the software.

1) To create a new database when starting the software, click on the Create a New

Database radio button. Type the name of the database and click Save .

2) If the software is already running, you can create a new database by clicking on New from the File menu, or the new database icon on the toolbar.

3) Whichever method you choose, the same Create New Database window will appear.

Figure 25. Creating a new database.

4) The Save as type folder is the default folder. Navigate to another folder if you prefer and enter the name of the new database in the box next to the file name.

5) Click on the Save button. A database will be created and opened that has one default motor and the default Test IDs. At this point begin entering new motors using the Data Nameplate tab.

28 PUB CM/I4 71-015 EN V13.2 Static Motor Analyzer—Baker AWA-IV User Manual