advertisement
2
Contents
Introduction..................................................................... 2
Troubleshooting............................................................ 26
Safety..............................................................................4
Transportation, storage and disposal........................... 27
Assembly...................................................................... 12
Operation...................................................................... 13
Maintenance................................................................. 19
Technical data.............................................................. 29
Accessories.................................................................. 29
Warranty....................................................................... 31
Introduction
Product description
Husqvarna T536LiXP is a chainsaw model with a battery motor.
Work is constantly in progress to increase your safety and efficiency during operation. Speak to your servicing dealer for more information.
Intended use
This tree service product is for tree maintenance such as pruning and disassemble of tree crowns.
Note: National regulations can restrict the operation of the product.
Product overview
13 14
3 4
1
2
5
15
6
7
21 20 19
18 17
22
16
12
11
10
25 9
8
23
24
27
28 29
33
1. Front hand guard
2. Keypad
3. SavE button
4. Warning indicator
26
31
32
30
5. Start and stop button
6. Information and warning decal
7. Top handle
8. Belt eyelet
488 - 002 - 01.03.2018
9. Rope eyelet
10. Fan housing
11. Chain oil tank
12. Front handle
13. Power trigger lockout
14. Power trigger
15. Spiked bumper
16. Bar tip sprocket
17. Saw chain
18. Guide bar
19. Chain catcher
20. Chain tensioning screw
21. Drive sprocket cover
22. Guide bar cover
23. Charging LED
24. Warning indicator
25. Power cord
26. Battery charger
27. Combination wrench
28. Button, battery status
29. Battery status
30. Warning indicator
31. Battery release button
32. Battery
33. Operator's manual
Symbols on the product
Risk of serious injury or death to the operator or others. Be careful and use the product correctly.
Read the operator's manual carefully and understand the instructions before operation of the product.
Wear approved protective helmet, hearing and eye protection.
Use appropriate protections for foot-leg and hand-arm.
Use both hands when you operate the product.
Never operate the product holding it with one hand.
Never let the guide bar tip touch an object.
Warning! Kickback can occur when the guide bar nose or guide bar tip touches an object. This causes the guide bar to be thrown in the direction of the operator. Risk of serious injury or death.
This saw should only be used by persons who are specially trained in tree maintenance work. See operator's manual!
L-Max
356 mm / 14"
The direction in which the saw chain rotates and maximum length of the guide bar.
Chain brake, engaged (right). Chain brake, disengaged (left).
Chain oil fill.
XX
XX
Direct current.
Recommended cutting equipment in this example: Bar length 14 inches (356 mm), max. nose radius 9 Teeth, chain type
Husqvarna H38.
Measured maximum kickback value without triggering the brake, for the bar and chain combination on the label.
Measured maximum kickback value with brake for the bar and chain combination on the label.
Environmental mark. The product or package of the product is not domestic waste. Recycle it at a recycling station for electrical and electronic equipment.
yyyywwxxxxx The rating plate shows serial number. yyyy is the production year, ww is the production week.
Note: Other symbols/decals on the product refer to certification requirements for certain markets.
488 - 002 - 01.03.2018
3
advertisement
Related manuals
advertisement
Table of contents
- 2 Introduction
- 2 Product description
- 2 Intended use
- 2 Product overview
- 3 Symbols on the product
- 4 Symbols on the battery and/or on the battery charger
- 4 Proposition 65
- 4 Safety
- 4 Safety definitions
- 4 General power tool safety warnings
- 4 Work area safety
- 4 Electrical safety
- 4 Personal safety
- 5 Power tool use and care
- 5 Battery tool use and care
- 5 Service
- 5 Chain saw safety warnings
- 6 Causes and operator prevention of kickback
- 6 General safety instructions
- 6 Safety instructions for operation
- 8 Personal protective equipment
- 8 Safety devices on the product
- 9 Keypad
- 9 The automatic stop function
- 9 Chain brake and front hand guard
- 10 Power trigger lockout
- 10 Chain catcher
- 10 Battery safety
- 11 Battery charger safety
- 11 Safety instructions for maintenance
- 11 Safety instructions for the cutting equipment
- 12 Assembly
- 12 To assemble the guide bar and saw chain
- 13 Operation
- 13 Introduction
- 13 To do a function check before you use the product
- 13 Chain oil
- 14 To connect the battery charger
- 14 To connect the battery to the battery charger
- 15 To start the product
- 15 To use the SavE function
- 15 To stop the product
- 16 General information about working technique
- 16 What is kickback?
- 17 Common questions about kickback
- 17 To prepare the product for operation in the tree
- 18 To use the product in the tree
- 18 To free a trapped product
- 19 Maintenance
- 19 Introduction
- 19 Maintenance and checks of the safety devices on the product
- 19 To do a check of the front hand guard
- 19 To do a check of the brake trigger
- 19 To do a check of the power trigger lockout
- 20 To do a check of the chain catcher
- 20 To do a check of the keypad
- 20 To do a check of the battery and the battery compartment
- 21 To do a check of the battery charger
- 21 To clean the cooling system
- 21 To sharpen the saw chain
- 21 Information about the guide bar and saw chain
- 22 General information about how to sharpen the cutting teeth
- 22 To sharpen the cutting teeth
- 23 General information about how to adjust the depth gauge setting
- 23 To adjust the depth gauge setting
- 23 To tighten the saw chain
- 24 Lubrication of the cutting equipment
- 24 To do a check of the saw chain lubrication
- 25 To do a check of the chain drive sprocket
- 25 To examine the cutting equipment for wear
- 25 To do a check of the guide bar
- 25 Maintenance schedule
- 26 Troubleshooting
- 26 Troubleshooting schedule
- 27 Transportation, storage and disposal
- 27 Transportation and storage
- 28 Disposal of the battery, battery charger and product
- 29 Technical data
- 29 Technical data
- 29 Accessories
- 29 Recommended cutting equipment for USA
- 29 Guide bar and saw chain combinations
- 29 Kickback information
- 30 Filing equipment and filing angles
- 30 Approved batteries for the product
- 30 Approved battery chargers for the product
- 31 Warranty
- 31 AMERICAN STANDARD SAFETY PRECAUTIONS
- 33 Introducción
- 33 Descripción del producto
- 33 Uso específico
- 33 Descripción general de la máquina
- 34 Símbolos en el producto
- 35 Símbolos en la batería o en el cargador de la batería
- 35 Propuesta 65
- 35 Seguridad
- 35 Definiciones de seguridad
- 35 Advertencias de seguridad generales de la herramienta eléctrica
- 35 Seguridad en el área de trabajo
- 35 Seguridad eléctrica
- 36 Seguridad personal
- 36 Uso y cuidado de la herramienta eléctrica
- 36 Uso y cuidado de la herramienta a batería
- 37 Servicio
- 37 Advertencias de seguridad de la motosierra
- 37 Causas de la reculada y prevención por parte del operador
- 38 Instrucciones generales de seguridad
- 38 Instrucciones de seguridad para el funcionamiento
- 40 Equipo de protección personal
- 40 Dispositivos de seguridad en el producto
- 40 Teclado
- 40 Función de parada automática
- 40 Freno de cadena y protección contra reculadas
- 42 Bloqueo del gatillo de alimentación
- 42 Captor de cadena
- 42 Seguridad de la batería
- 43 Seguridad del cargador de batería
- 43 Instrucciones de seguridad para el mantenimiento
- 43 Instrucciones de seguridad para el equipo de corte
- 44 Montaje
- 44 Para montar la espada guía y la cadena de sierra
- 45 Funcionamiento
- 45 Introducción
- 45 Para realizar una comprobación de funcionamiento antes de utilizar el producto
- 46 Aceite para cadena
- 46 Para conectar el cargador de la batería
- 46 Para conectar la batería al cargador
- 47 Para poner en marcha la máquina
- 47 Utilice la función de ahorro (SavE)
- 48 Para detener la máquina
- 48 Información general acerca de la técnica de trabajo
- 49 ¿Qué es una reculada?
- 49 Preguntas frecuentes acerca de las reculadas
- 50 Cómo preparar el producto para el funcionamiento en el árbol
- 51 Cómo utilizar el producto en un árbol
- 51 Cómo liberar un producto atrapado
- 52 Mantenimiento
- 52 Introducción
- 52 Mantenimiento y comprobaciones de los dispositivos de seguridad en el producto
- 52 Cómo verificar la protección contra reculadas
- 52 Cómo verificar el gatillo del freno
- 52 Comprobación del bloqueo del gatillo de alimentación
- 53 Cómo realizar una verificación del captor de cadena
- 53 Para comprobar el teclado
- 53 Cómo realizar una verificación de la batería y del compartimiento de la batería
- 54 Para comprobar el cargador de la batería
- 54 Cómo limpiar el sistema de refrigeración
- 54 Para afilar la cadena de sierra
- 54 Información sobre la espada guía y la cadena de sierra
- 55 Información general sobre cómo afilar los dientes de corte
- 55 Para afilar los dientes de corte
- 56 Información general sobre cómo ajustar la configuración del calibre de profundidad
- 56 Para ajustar el calibre de profundidad
- 57 Para apretar la cadena de sierra
- 57 Lubricación del equipo de corte
- 57 Para realizar una comprobación de la lubricación de la cadena de sierra
- 58 Cómo verificar el piñón de arrastre de la cadena
- 58 Para examinar el desgaste del equipo de corte
- 58 Para comprobar la espada guía
- 59 Programa de mantenimiento
- 60 Solución de problemas
- 60 Programa de solución de problemas
- 61 Transporte, almacenamiento y eliminación de residuos
- 61 Transporte y almacenamiento
- 62 Eliminación de la batería, el cargador y el producto
- 62 Datos técnicos
- 62 Datos técnicos
- 62 Accesorios
- 62 Equipo de corte recomendado para EE. UU.
- 63 Combinaciones de cadena de sierra y espada guía
- 63 Información de reculada
- 63 Equipos de afilado y ángulos de afilado
- 63 Baterías aprobadas para el producto
- 64 Cargadores de batería homologados para el producto
- 64 Garantía
- 64 PRECAUCIONES DE SEGURIDAD DE NORMAS ESTADOUNIDENSES
- 66 Introduction
- 66 Description du produit
- 66 Utilisation prévue
- 66 Présentation de l’appareil
- 67 Symboles figurant sur l'outil
- 68 Symboles figurant sur la batterie et sur le chargeur de batterie
- 68 Proposition 65
- 68 Sécurité
- 68 Définitions relatives à la sécurité
- 68 Consignes générales de sécurité relatives aux outils électriques
- 68 Sécurité de l’aire de travail
- 68 Sécurité électrique
- 69 Sécurité personnelle
- 69 Utilisation et entretien des outils électriques
- 69 Utilisation et entretien des outils électriques à batteries
- 70 Réparations
- 70 Consignes de sécurité concernant la tronçonneuse
- 70 Causes et prévention des rebonds
- 71 Consignes générales de sécurité
- 71 Consignes de sécurité pour l’utilisation
- 73 Équipement de protection personnelle
- 73 Dispositifs de sécurité sur l’outil
- 73 Clavier
- 73 La fonction d’arrêt automatique
- 74 Frein de chaîne et protège-main avant
- 75 Mécanisme de verrouillage de la gâchette
- 75 Attrape-chaîne
- 75 Sécurité en matière de batteries
- 76 Sécurité du chargeur de batteries
- 76 Consignes de sécurité pour la maintenance
- 76 Consignes de sécurité relatives à l’équipement de coupe.
- 77 Montage
- 77 Montage du guide-chaîne et de la chaîne
- 78 Fonctionnement
- 78 Introduction
- 78 Pour vérifier le fonctionnement avant d’utiliser le produit
- 78 Huile pour chaîne
- 79 Pour brancher le chargeur de batterie
- 79 Pour connecter la batterie au chargeur de batterie.
- 80 Mise sous tension de l’appareil
- 80 Pour utiliser la fonction SavE (économie)
- 81 Mise hors tension de l’appareil
- 81 Renseignements généraux sur la technique de travail.
- 82 Qu’est-ce qu’un rebond?
- 82 Questions fréquentes à propos du rebond
- 82 Pour préparer le produit à des fins d’utilisation dans l’arbre.
- 83 Pour utiliser le produit dans l’arbre
- 84 Pour dégager un produit coincé
- 84 Entretien
- 84 Introduction
- 84 Entretien et vérifications des dispositifs de sécurité du produit
- 84 Vérification du protège-main avant
- 84 Pour vérifier la gâchette de frein
- 85 Vérification du verrouillage de la gâchette
- 85 Pour vérifier l’attrape-chaîne.
- 85 Vérification du clavier
- 85 Pour vérifier la batterie et le compartiment de batterie
- 86 Vérifier le chargeur de batterie
- 86 Nettoyage du système de refroidissement
- 86 Affûter la chaîne.
- 86 Renseignements à propos du guide-chaîne et de la chaîne
- 87 Renseignements généraux sur comment affûter les dents de coupe
- 88 Affûtage des dents de coupe
- 88 Renseignements généraux sur comment ajuster le réglage de la jauge de profondeur
- 88 Réglage de la jauge de profondeur
- 89 Pour serrer la chaîne
- 89 Lubrification de l’équipement de coupe
- 89 Vérification de la lubrification de la chaîne
- 90 Pour vérifier le pignon d’entraînement de la chaîne
- 90 Pour examiner l’équipement de coupe afin de détecter toute éventuelle usure
- 90 Pour vérifier le guide-chaîne
- 91 Calendrier d’entretien
- 92 Dépannage
- 92 Annexe sur le dépannage
- 93 Transport, entreposage et mise au rebut
- 93 Transport et entreposage
- 94 Mise au rebut de la batterie, du chargeur de batterie et du produit
- 94 Données techniques
- 94 Données techniques
- 94 Accessoires
- 94 Équipement de coupe recommandé pour les États-Unis
- 95 Combinaisons de guide-chaîne et de chaîne
- 95 Renseignements sur le rebond
- 95 Équipement d’affûtage et angles d’affûtage
- 95 Batteries homologuées pour le produit
- 96 Chargeurs de batteries homologués pour le produit
- 96 Garantie
- 96 CONSIGNES DE SÉCURITÉ RELATIVES À LA NORME AMÉRICAINE