advertisement
2. MFP server Modes
This MFP server supports two modes: All-in-one MFP server Mode and MFP server Mode. Users can choose one of these modes to share all-in-one or printer functions through the MFP server.
All-in-one MFP server Mode:
The MFP server can communicate with an all-in-one printer as if it was connected directly to your computer. This enables users to connect to the all-in-one for sharing print, scan, card reader, and fax functions (if available).
The supported OS in this mode is Windows 2000 SP4 and above, Windows
XP SP1 and above, and Windows Vista 32 and Vista 64. The all-in-one MFP server mode doesn’t support Windows 98SE/ME/NT, Linux/Unix or MAC OS.
For the detailed instructions, please refer to the following chapters.
Chapter 3: Using the all-in-one printer
Chapter 4: MFP Manager
2
MFP server Mode:
The MFP server also supports LPR, IPP and RAW printing protocols, which enable users to share the print function from an all-in-one printer. The supported Operating Systems are Windows 98SE/Me/NT/2000/XP/2003/Vista, and MAC OS 9.x and above. For detailed instructions, please refer to the following chapters.
Chapter 7: LPR Printing
Chapter 8: RAW Printing
Chapter 9: IPP Printing
Chapter 10: MFP server Installation in MAC OS
3
advertisement
Related manuals
advertisement