Input and output lists
Appendix C Input and output lists
The lists below are intended to be used as a memory aid during configuration, in order to help keep track of the desired input and output functions.
The left column contains the name of the in-/output signal, the middle column displays the name of the corresponding signal in Application tool and the right column shows the text displayed in the controller.
C.1 Analog inputs
Name
Outdoor temperature sensor
Intake air temperature sensor
Supply air temperature sensor
Exhaust air temperature sensor
Extract air temperature sensor
Room temperature sensor 1
Room temperature sensor 2
Room temperature sensor 3
Room temperature sensor 4
Room temperature sensor 5
Room temperature sensor 6
Room temperature sensor 7
Room temperature sensor 8
Room temperature sensor 9
Room temperature sensor 10
Room temperature sensor 11
Room temperature sensor 12
Room temperature sensor 13
Room temperature sensor 14
Room temperature sensor 15
Room temperature sensor 16
Pressure transmitter supply air
Pressure transmitter extract air
Flow transmitter supply air
Flow transmitter extract air
Flow transmitter exchanger supply air
Exchanger EAF pressure transmitter
De-icing temperature heat exchanger
Frost protection temperature sensor 1
Frost protection temperature sensor 2
Frost protection temperature sensor 3
CO2/VOC sensor
Room humidity transmitter (% RH)
Supply air humidity transmitter (% RH)
Outdoor air humidity transmitter (% RH)
Temperature extra controller
Corrigo manual, Rev. D
Name in Application tool
Outdoor temperature
Intake air temperature
Supply air temperature
Exhaust air temperature
Extract air temperature
Room temperature 1
Room temperature 2
Room temperature 3
Room temperature 4
Room temperature 5
Room temperature 6
Room temperature 7
Room temperature 8
Room temperature 9
Room temperature 10
Room temperature 11
Room temperature 12
Room temperature 13
Room temperature 14
Room temperature 15
Room temperature 16
Pressure supply air
Pressure extract air
Flow supply air
Flow extract air
Flow exchanger supply air
Pressure exchanger extract air
Defrosting temperature
Freeze protection temperature 1
Freeze protection temperature 2
Freeze protection temperature 3
CO2 room/extract air
Humidity room/extract air
Humidity supply air
Humidity outdoor
Extra controller temperature
Description
171 (196)
Input and output lists
Name
External control signal SAF (%)
External control signal EAF (%)
Extra sensor 1
Extra sensor 2
Extra sensor 3
Extra sensor 4
Extra sensor 5
External supply setpoint (PT1000)
External Setpoint airflow (m3/h)
Filter supply pressure transmitter
Filter extract pressure transmitter
Efficiency temperature sensor exchanger
Name in Application tool
External control supply air fan
External control extract air fan
Extra sensor 1
Extra sensor 2
Extra sensor 3
Extra sensor 4
Extra sensor 5
External setpoint temperature
External setpoint flow
Pressure filter supply air
Pressure filter extract air
Efficiency temperature exchanger
Description
C.2 Digital inputs
Name
Supply air fan motor protection/run indication
Extract air fan motor protection/run indication
Extended operation low speed
Extended operation normal speed
Extended operation high speed
Fire alarm
Smoke alarm
External alarm
Fire damper end-switch monitoring
Feedback/Indication Sequence A
Feedback/Indication Sequence B
Feedback/Indication Sequence C
Feedback/Indication Sequence D
Feedback/Indication Sequence E
Feedback/Indication Sequence F
Feedback/Indication Sequence G
Feedback/Indication Sequence H
Feedback/Indication Sequence I
Feedback/Indication Sequence J
Electric heating is overheated
External stop
Acknowledge all alarms
Flow switch
De-icing exchanger
Rotation exchanger
Frost protection thermostat
Start Recirculation Run
Change over signal 1, switches between heating=0 and cooling=1 on the output signal
Name in Application tool
Feedback supply air fan
Feedback extract air fan
Extended operation low speed
Extended operation normal speed
Extended operation high speed
Fire alarm
Smoke alarm
External alarm
Feedback fire damper
Feedback sequence A
Feedback sequence B
Feedback sequence C
Feedback sequence D
Feedback sequence E
Feedback sequence F
Feedback sequence G
Feedback sequence H
Feedback sequence I
Feedback sequence J
Overheated electric heater
External stop
Alarm acknowledgement
Flow guard
Defrosting guard exchanger
Rotary exchanger alarm
Freeze protection guard
Start/(Stop) recirculation
Cooling/(heating) Change-over 1
Description
172 (196) Corrigo manual, Rev. D
Input and output lists
Name
Change over signal 2, switches between heating=0 and cooling=1 on the output signal
Filter guard 1 supply air
Filter guard 2 extract air
Motor control 1 start
Motor control 2 start
Motor control 1 protection/run indication
Motor control 2 protection/run indication
Extra alarm 1
Extra alarm 2
Extra alarm 3
Extra alarm 4
Extra alarm 5
Extra alarm 6
Extra alarm 7
Extra alarm 8
Extra alarm 9
Extra alarm 10
Freeze supply PID
Summer mode
Feedback/Indication extra controller
Name in Application tool
Cooling/(Heating) Change-over 2
Description
Filter guard supply air
Filter guard extract air
Start/(Stop) extra fan motor 1
Start/(Stop) extra fan motor 2
Feedback extra fan motor 1
Feedback extra fan motor 2
Extra alarm 1
Extra alarm 2
Extra alarm 3
Extra alarm 4
Extra alarm 5
Extra alarm 6
Extra alarm 7
Extra alarm 8
Extra alarm 9
Extra alarm 10
Lock PID controller supply
Summer/(Winter) mode
Feedback extra controller
C.3 Universal inputs
Universal inputs on the controller can be individually configured as either analog inputs, using any of the analog input signals above, or as digital inputs, using any of the digital inputs above.
C.4 Analog outputs
Name
Sequence A output in (%)
Sequence B output in (%)
Sequence C output in (%)
Sequence D output in (%)
Sequence E output in (%)
Sequence F output in (%)
Sequence G output in (%)
Sequence H output in (%)
Sequence I output in (%)
Sequence J output in (%)
Change over 1 (%)
Change over 2 (%)
Control signal Supply air fan in (%)
Control signal Extract air fan in (%)
Name in Application tool
Sequence A
Sequence B
Sequence C
Sequence D
Sequence E
Sequence F
Sequence G
Sequence H
Sequence I
Sequence J
Change-over 1
Change-over 2
Supply air fan
Extract air fan
Description
Corrigo manual, Rev. D 173 (196)
Input and output lists
Name
Control valve Humidity (%)
Step Controller 1 (%)
Step Controller 2 (%)
Extra controller (%)
AI Signal output (%)
C.5 Digital outputs
Name
Sequence A Start
Sequence B Start
Sequence C Start
Sequence D Start
Sequence E Start
Sequence F Start
Sequence G Start
Sequence H Start
Sequence I Start
Sequence J Start
Sequence A Pump Start
Sequence B Pump Start
Sequence C Pump Start
Sequence D Pump Start
Sequence E Pump Start
Sequence F Pump Start
Sequence G Pump Start
Sequence H Pump Start
Sequence I Pump Start
Sequence J Pump Start
Sequence A PWM
Sequence B PWM
Sequence C PWM
Sequence D PWM
Sequence E PWM
Sequence F PWM
Sequence G PWM
Sequence H PWM
Sequence I PWM
Sequence J PWM
Sequence A actuator increase
Sequence B actuator increase
Sequence C actuator increase
Sequence D actuator increase
174 (196)
Name in Application tool
Humidity control
Step controller 1
Step controller 2
Extra controller
Temperature output
Description
Name in Application tool
Sequence A start
Sequence B start
Sequence C start
Sequence D start
Sequence E start
Sequence F start
Sequence G start
Sequence H start
Sequence I start
Sequence J start
Sequence A pump
Sequence B pump
Sequence C pump
Sequence D pump
Sequence E pump
Sequence F pump
Sequence G pump
Sequence H pump
Sequence I pump
Sequence J pump
Sequence A PWM
Sequence B PWM
Sequence C PWM
Sequence D PWM
Sequence E PWM
Sequence F PWM
Sequence G PWM
Sequence H PWM
Sequence I PWM
Sequence J PWM
Sequence A increase
Sequence B increase
Sequence C increase
Sequence D increase
Description
Corrigo manual, Rev. D
Name
Sequence E actuator increase
Sequence F actuator increase
Sequence G actuator increase
Sequence H actuator increase
Sequence I actuator increase
Sequence J actuator increase
Sequence A actuator decrease
Sequence B actuator decrease
Sequence C actuator decrease
Sequence D actuator decrease
Sequence E actuator decrease
Sequence F actuator decrease
Sequence G actuator decrease
Sequence H actuator decrease
Sequence I actuator decrease
Sequence J actuator decrease
Start supply air fan/Start step 1 supply air fan
Start step 2 supply air fan
Start step 3 supply air fan
Start extract air fan/ Start step 1 extract air fan
Start step 2 extract air fan
Start step 3 extract air fan
Recirculation air close-off damper
Outdoor air close-off damper
Exhaust air close-off damper open/close fire dampers
Sum alarm 1
Sum alarm 2
Alarm output
Start motor control 1
Start motor control 2
Time Channel 1
Time Channel 2
Time Channel 3
Time Channel 4
Free Cool Run
Pretreatment
Run indication
Step Controller 1 output step 1
Step Controller 1 output step 2
Step Controller 1 output step 3
Step Controller 1 output step 4
Step Controller 2 output step 1
Step Controller 2 output step 2
Step Controller 2 output step 3
Name in Application tool
Sequence E increase
Sequence F increase
Sequence G increase
Sequence H increase
Sequence I increase
Sequence J increase
Sequence A decrease
Sequence B decrease
Sequence C decrease
Sequence D decrease
Sequence E decrease
Sequence F decrease
Sequence G decrease
Sequence H decrease
Sequence I decrease
Sequence J decrease
Supply air fan start/step 1
Supply air fan step 2
Supply air fan step 3
Extract air fan start/step 1
Extract air fan step 2
Extract air fan step 3
Recirculation air damper
Outdoor air damper
Exhaust air damper
Fire damper
Sum alarm 1
Sum alarm 2
Alarm output
Extra fan motor 1 start
Extra fan motor 2 start
Extra time channel 1
Extra time channel 2
Extra time channel 3
Extra time channel 4
Free cooling indication
Pretreatment start
Running indication
Step controller 1 step 1
Step controller 1 step 2
Step controller 1 step 3
Step controller 1 step 4
Step controller 2 step 1
Step controller 2 step 2
Step controller 2 step 3
Corrigo manual, Rev. D
Input and output lists
Description
175 (196)
Input and output lists
Name
Step Controller 2 output step 4
Start Dehumidifier/Humidifier
Start Change over 1
Start Change over 2
Outdoor temperature controlled Exchanger
Start Extra control unit
Extra controller pump start
Name in Application tool
Step controller 2 step 4
Humidify control start
Change-over 1 (Change-over 1 start)
Change-over 2 (Change-over 2 start)
Outdoor controlled exchanger
Extra controller start
Extra controller pump
Description
176 (196) Corrigo manual, Rev. D
