advertisement
Initial Setup
Auto Tuner Setup
The auto tuner setup function is described on page 22 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps below.
Press the M
ENU
button
To AUTO TUNER SETUP
√ ® To operate
√ ® To choose CABLE or AIR
Press the O
K
button to start
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the message PROGRAMMING OVER!
appears onscreen.
Press the Menu button when finished
Channel Summary
Channel summary allows you to customize the line-up of channels received by your TV. You can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 181 channels.
Press the M ENU button
To CHANNEL SUMMARY
√ ® To
The Channel summary screen will now be displayed with the channels set to scan marked with an “ √ ”. You can delete channels from the scan by removing the “ √ ”. If any channels were missed during auto tuner setup and you wish to add them, you may by placing an “ √ ” next to the channel number.
√ ® To the SCAN column
Press the O
K
button to include or delete from scan
Press the M
ENU
button when finished
You can block access to a channel by activating the channel lock.
Press the M ENU button
√ ® To operate
√ ® To the Lock Column ( )
Press the Z ERO button to lock or unlock that channel
Press the M ENU button when finished
30
AV-56\65WP84 English 30 7/11/03, 9:32:44 AM
advertisement