advertisement
Button Functions
POP
You can view three separate pictures (still images) on screen on the right side of the TV’s main picture. The picture of the still image will be renewed in order (from top to bottom).
SEPARATE PICTURES
MAIN PICTURE
To change the channel of separate pictures:
• Press the S
ELECT
button and select the separate picture which you want to change. Press the N
UMBER
buttons and select the channel.
To display the channel of the separate picture on the full screen:
• Press the S
ELECT
button and select the separate picture which you want to display on the full screen. Press the OK button.
Notes:
• This function will not work when the picture from all external input is displayed.
• SWAP function will not work.
Cable Box Note:
The 2–Tuner Multi Screen function may not operate when used with certain cable boxes.
This is because while some models of cable boxes may receive up to 181 channels, and may only send the signal from one channel to your television. (Please refer to diagram on page
13). For the 2–Tuner Multi screen function to operate correctly, it must have access to all available channels. Since the television is receiving the signal from only one channel from the cable box, it is impossible for the 2–Tuner Multi screen function to display a second, different channel. Because there are many different models of cable boxes in use today, if you are having problems operating your 2–Tuner Multi screen function feature with your cable box, we recommend you contact your local cable company for connection advice.
Index
This allows you to quickly look at up to 12 channels at a time so that you can decide which one to watch.
Notes:
• Only RF input signal will be displayed.
• You can watch the channel added in channel summary. See page 30.
52
AV-56\65WP84 English 52 7/11/03, 9:32:55 AM
advertisement