advertisement
Initial Setup
V1 Smart Input
This feature is used if you have connected an AV Receiver to your television. By turning this feature on, your television can automatically detect the signal source from your components that are connected to your AV Receiver.
Press the M
ENU
button
To V1 SMART INPUT
√ ® To turn ON or OFF
Press the MENU button when finished
Notes:
• If you do not have an AV Receiver connected to your television, turn this feature OFF. By doing so, you can take advantage of using AV CompuLink components with your television.
• Some AV Receivers may not work with this function.
Position Adjustment
Position adjustment allows you to adjust the position of the picture on the screen vertically when the aspect is set to panorama, cinema, or full.
Press the M
ENU
button
To POSITION ADJUSTMENT
√ ® To enter
√ ® To adjust the position
Press the M
ENU
button to finish
Notes:
• To reset the adjustment to the center, press the O
K
button.
• When the arrow disappears, while you are adjusting the position, the position is at it’s maximum limit.
• If you select regular size with aspect or Multi Screen, position adjustment option is not seen.
• When you change the screen size, perform the position adjustment again.
• Position adjustment allows you to adjust the screen position vertically and horizontally when the aspect is set HD panorama or cinema zoom for 1080i signal.
Power Indicator
Power indicator allows you to adjust the brightness of the power indicator
Press the M ENU button
√ ® To adjust POWER INDICATOR LOW, HIGH or OFF
Notes :
• When OFF is selected :
The LED disappears if the you have a TV signal.
The LED is lit as “LOW” when there is no TV signal.
43
AV-56\65WP84 English 43 7/11/03, 9:32:51 AM
advertisement