WIRING THE SU. Enertronica Santerno Sinus Penta, SOLARDRIVE PLUS, IRIS BLUE, PENTA MARINE
Add to My manuals312 Pages
advertisement
▼
Scroll to page 2
of
312
advertisement
Related manuals
advertisement
Table of contents
- 2 REVISION INDEX
- 2 SANTERNO USER MANUALS MENTIONED IN THIS GUIDE
- 16 OVERVIEW
- 16 POWER SUPPLY UNIT FOR DRIVES S41..S52 (SU465)
- 17 DELIVERY CHECK
- 17 INSTALLING AND OPERATING THE SU
- 17 SU465 NAMEPLATE
- 18 SU465 OPERATING MODE
- 18 SU465 OPERATION AS A 12-PULSE SUPPLY UNIT
- 19 SYSTEM REQUIREMENTS
- 19 TECHNICAL SPECIFICATIONS
- 20 INSTALLING THE SU
- 20 AND TRANSPORT
- 21 MOUNTING THE SU
- 22 IP21 KIT
- 23 THROUGH-PANEL KIT
- 24 NEMA1 KIT
- 25 POWER TERMINALS AND SIGNAL TERMINALS LAYOUT
- 26 SIGNAL CONNECTIONS
- 29 WIRING THE SU
- 30 DEVICES WHEN THE SU465 IS INSTALLED
- 31 EARTH BONDING OF THE SU
- 31 SCHEDULED MAINTENANCE OF THE SU
- 31 CONNECTION
- 33 RESISTIVE BRAKING
- 34 INTERNAL BRAKING UNIT
- 35 APPLICATIONS WITH DUTY CYCLE 10% - CLASS 2T
- 36 APPLICATIONS WITH DUTY CYCLE 20% - CLASS 2T
- 37 APPLICATIONS WITH DUTY CYCLE 50% - CLASS 2T
- 38 APPLICATIONS WITH DUTY CYCLE 10% - CLASS 4T
- 39 APPLICATIONS WITH DUTY CYCLE 20% - CLASS 4T
- 40 APPLICATIONS WITH DUTY CYCLE 50% - CLASS 4T
- 41 APPLICATIONS WITH DUTY CYCLE 10% - CLASS 5T
- 42 APPLICATIONS WITH DUTY CYCLE 20% - CLASS 5T
- 43 APPLICATIONS WITH DUTY CYCLE 50% - CLASS 5T
- 44 APPLICATIONS WITH DUTY CYCLE 10% - CLASS 6T
- 45 APPLICATIONS WITH DUTY CYCLE 20% - CLASS 6T
- 46 APPLICATIONS WITH DUTY CYCLE 50% - CLASS 6T
- 47 BRAKING UNIT (BU200 2T-4T) FOR S41-S51 AND S60-S60P
- 47 DELIVERY CHECK
- 49 OPERATION
- 49 CONFIGURATION JUMPERS
- 50 ADJUSTING TRIMMERS
- 51 INDICATOR LEDS
- 51 RATINGS
- 52 INSTALLING THE BU
- 56 EARTH BONDING OF THE BU
- 56 SCHEDULED MAINTENANCE OF THE BU
- 57 BRAKING RESISTORS FOR BU200 2T
- 59 BRAKING RESISTORS FOR BU200 4T
- 61 DRIVES S60-S60P (BU600 4T-5T-6T)
- 61 DELIVERY CHECK
- 62 CONFIGURATION IN PARALLEL
- 63 FROM DIFFERENT SIZES
- 63 DC-BUS
- 64 DIAGNOSTICS
- 65 SPECIFICATIONS
- 65 INSTALLING THE BU
- 74 EARTH BONDING OF THE BU
- 74 PROTECTING THE BRAKING RESISTORS
- 74 SCHEDULED MAINTENANCE OF THE BU
- 75 BRAKING RESISTORS TO BE APPLIED TO BU600 4T
- 78 BRAKING RESISTORS TO BE APPLIED TO BU600 5T-6T
- 83 SERIAL COMMUNICATIONS
- 86 AUXILIARY POWER SUPPLY
- 87 5T-6T)
- 87 DELIVERY CHECK
- 88 OPERATION
- 88 RATINGS
- 89 INSTALLING THE BU
- 97 EARTH BONDING OF THE BU
- 97 SCHEDULED MAINTENANCE OF THE BU
- 97 BRAKING RESISTORS FOR BU1440 4T
- 100 BRAKING RESISTORS FOR BU1440 5T-6T
- 104 AVAILABLE BRAKING RESISTORS
- 104 350W MODELS (IP55)
- 105 550W MODELS (IP33)
- 106 IP54 MODELS FROM 1100W TO 2200W
- 108 IP20 MODELS FROM 4KW-8KW-12KW
- 110 IP23 BOXES FROM 4KW TO 64KW
- 119 NEMA 1 GLANDKIT
- 119 NAMEPLATE NEMA 1 GLANDKIT
- 120 IDENTICATION DATA
- 120 2T-4T VOLTAGE CLASSES
- 120 5T-6T VOLTAGE CLASSES
- 121 GLANDKIT
- 122 KEYPAD REMOTING KIT
- 122 REMOTING THE KEYPAD ON THE CABINET
- 123 INDUCTORS
- 123 INPUT INDUCTORS
- 126 OUTPUT INDUCTORS (DU/DT FILTERS)
- 127 APPLYING THE INDUCTOR TO THE INVERTER
- 127 – AC AND DC INDUCTORS
- 130 INDUCTANCE RATINGS
- 130 – AC 3-PHASE INDUCTORS
- 132 – DC INDUCTORS
- 134 – 3-PHASE DU/DT INDUCTORS
- 135 – 3-PHASE AC INDUCTORS IN IP54 CABINET
- 140 – CLASS 4T-5T-6T
- 141 SINE FILTERS
- 142 OUTPUT TOROIDAL FILTERS
- 143 ES836/2 ENCODER BOARD (SLOT A)
- 143 IDENTIFICATION DATA
- 144 ENVIRONMENTAL REQUIREMENTS
- 144 ELECTRICAL SPECIFICATIONS
- 145 INSTALLING ES836/2 ENCODER BOARD ON THE INVERTER (SLOT A)
- 146 TERMINALS IN ENCODER BOARD
- 146 CONFIGURATION DIP-SWITCHES
- 147 JUMPER SELECTING THE TYPE OF ENCODER SUPPLY
- 148 ADJUSTING TRIMMER
- 148 ENCODER WIRING AND CONFIGURATION
- 153 WIRING THE ENCODER CABLE
- 154 ES913 LINE DRIVER ENCODER BOARD (SLOT A)
- 154 IDENTIFICATION DATA
- 154 ENVIRONMENTAL REQUIREMENTS
- 155 ELECTRICAL SPECIFICATIONS
- 156 INSTALLING THE LINE DRIVER BOARD ON THE INVERTER (SLOT A)
- 157 TERMINALS IN THE LINE DRIVER ENCODER BOARD
- 157 CONFIGURATION DIP-SWITCHES
- 158 ENCODER SUPPLY SELECTION JUMPER
- 159 ADJUSTING TRIMMER
- 160 ES860 SIN/COS ENCODER BOARD (SLOT A)
- 162 IDENTIFICATION DATA
- 162 INSTALLING ES860 BOARD ON THE INVERTER (SLOT A)
- 164 SIN/COS ENCODER CONNECTOR
- 165 ES860 CONFIGURATION AND OPERATING MODES
- 166 CONFIGURING AND ADJUSTING THE ENCODER SUPPLY VOLTAGE
- 167 CONNECTING THE ENCODER CABLE
- 168 ENVIRONMENTAL REQUIREMENTS
- 168 ELECTRICAL RATINGS
- 170 ES822 ISOLATED SERIAL BOARD (SLOT B)
- 170 IDENTIFICATION DATA
- 170 ENVIRONMENTAL REQUIREMENTS
- 171 ELECTRICAL FEATURES
- 172 INSTALLING ES822 BOARD ON THE INVERTER (SLOT B)
- 173 JUMPER FOR RS232/RS485 SELECTION
- 173 DIP-SWITCH FOR RS485 TERMINATOR
- 174 OPTION BOARDS FOR FIELDBUS (SLOT B)
- 175 IDENTIFICATION DATA
- 176 INSTALLING THE FIELDBUS BOARD ON THE INVERTER (SLOT B)
- 178 STATUS LEDS ON THE B40 SERIES BOARDS
- 178 NSTA/MSTA LEDS - PROFIBUS DP
- 178 NSTA/MSTA LEDS - DEVICENET
- 179 NSTA/MSTA LEDS - PROFINET
- 179 NSTA/MSTA LEDS LEDS - MODBUS/TCP
- 179 NSTA/MSTA LEDS - ETHERNET IP
- 179 NSTA/MSTA LEDS - ETHERCAT
- 180 PROFINET LINK LEDS
- 180 MODBUS/TCP LINK LEDS
- 180 ETHERNET IP LINK LEDS
- 180 ETHERCAT LINK LEDS
- 182 STATUS LEDS ON THE ANYBUS-S BOARDS
- 182 LEDS FOR FIELDBUS INTERFACE CPU DIAGNOSTICS
- 183 BOARD DIAGNOSTICS
- 184 LEDS FOR ETHERNET BOARD DIAGNOSTICS
- 185 B40 SERIES BOARD FOR PROFIBUS-DP
- 186 PROFIBUS® FIELDBUS CONNECTOR
- 186 BUS CONFIGURATION
- 187 CONNECTION TO THE FIELDBUS
- 188 MODBUS/TCP, ETHERCAT, ETHERNET/IP)
- 189 ETHERNET CONNECTOR
- 189 CONNECTION TO THE NETWORK
- 190 CONFIGURING B40 SERIES BOARDS WITH ETHERNET INTERFACE
- 193 FIELDBUS DEVICENET TERMINAL BOARD
- 194 CONNECTION TO THE FIELDBUS
- 195 BOARD
- 196 PROFIBUS® FIELDBUS CONNECTOR
- 196 CONFIGURATION OF THE PROFIBUS-DP COMMUNICATIONS BOARD
- 198 CONNECTION TO THE FIELDBUS
- 199 BOARD
- 200 FIELDBUS TERMINALS
- 200 BOARD CONFIGURATION
- 201 CONNECTION TO THE FIELDBUS
- 202 FIELDBUS BOARD
- 203 FIELDBUS CONNECTOR
- 203 BOARD CONFIGURATION
- 204 CONNECTION TO THE FIELDBUS
- 205 ANYBUS-S ETHERNET BOARD FOR MODBUS/TCP
- 206 ETHERNET CONNECTOR
- 206 CONNECTION TO THE NETWORK
- 208 CONFIGURATION OF THE ETHERNET BOARD FOR MODBUS/TCP
- 215 ENVIRONMENTAL REQUIREMENTS COMMON TO ALL BOARDS
- 216 ES919 COMMUNICATIONS BOARD (SLOT B)
- 216 IDENTIFICATION DATA
- 216 ENVIRONMENTAL REQUIREMENTS COMMON TO ALL BOARDS
- 217 ELECTRICAL FEATURES COMMON TO ALL BOARDS
- 217 INSTALLING THE ES919 BOARD ON THE DRIVE (SLOT B)
- 219 CONFIGURATION
- 219 RS485 CONNECTOR
- 219 LEDS ON THE ASP485 PROTOCESSOR MODULE
- 220 BAUD RATE DIP-SWITCHES
- 220 ADDRESS DIP-SWITCHES
- 220 ES919 BOARD FOR BACNET/ETHERNET
- 221 ETHERNET CONNECTOR
- 221 LEDS ON THE FFP485 PROTOCESSOR MODULE
- 222 TROUBLESHOOTING TIPS
- 223 BOARD CONFIGURATION
- 224 ES919 BOARD FOR BACNET/RS
- 224 RS485 CONNECTOR
- 225 BOARD CONFIGURATION
- 226 BRIDGE MINI (SLOT B)
- 227 IDENTIFICATION DATA
- 227 INSTALLING THE BOARD ON THE INVERTER (SLOT B)
- 227 CONNECTIVITY
- 228 ES847 I/O EXPANSION BOARD (SLOT C)
- 229 IDENTIFICATION DATA
- 229 INSTALLING ES847 BOARD ON THE INVERTER (SLOT C)
- 231 ES847 BOARD TERMINALS
- 233 CONFIGURATION DIP-SWITCHES
- 234 POSSIBLE SETTINGS FOR DIP-SWITCHES SW1 AND SW
- 236 WIRING DIAGRAMS
- 236 CONNECTION OF “FAST” DIFFERENTIAL ANALOG INPUTS
- 237 OF “FAST” CURRENT INPUTS
- 237 CONNECTING “SLOW” ANALOG INPUTS TO VOLTAGE SOURCES
- 238 CONNECTING “SLOW” ANALOG INPUTS TO CURRENT SOURCES
- 238 CONNECTING “SLOW” ANALOG INPUTS TO THERMISTOR PT
- 239 CONNECTING ISOLATED DIGITAL INPUTS
- 240 CONNECTION TO AN ENCODER OR A FREQUENCY INPUT
- 241 CONNECTION TO ISOLATED DIGITAL OUTPUTS
- 242 ENVIRONMENTAL REQUIREMENTS
- 243 ELECTRICAL RATINGS
- 243 ANALOG INPUTS
- 245 DIGITAL INPUTS
- 246 DIGITAL OUTPUTS
- 246 SUPPLY OUTPUTS
- 247 ES870 RELAY I/O EXPANSION BOARD (SLOT C)
- 247 IDENTIFICATION DATA
- 248 INSTALLING ES870 BOARD ON THE INVERTER (SLOT C)
- 249 ES870 BOARD TERMINALS
- 250 CONNECTION TO AN ENCODER OR A FREQUENCY INPUT
- 251 I/O EXPANSION BOARD 120/240VAC ES988 (SLOT C)
- 252 IDENTIFICATION DATA
- 252 INSTALLING THE ES988 OPTION BOARD ON THE DRIVES (SLOT C)
- 255 DIGITAL INPUT TERMINALS AND RELAY OUTPUT
- 256 ES988 OPERATING MODE
- 258 MAIN FEATURES
- 258 ENVIRONMENTAL CONDITIONS
- 259 ELECTRICAL SPECIFICATIONS
- 262 IDENTIFICATION DATA
- 263 INSTALLING ES861 BOARD ON THE INVERTER (SLOT C)
- 265 RESOLVER CONNECTOR
- 266 INCREMENTAL ENCODER AND DIGITAL LINES CONNECTORS
- 267 ES861 CONFIGURATION AND OPERATING MODES
- 267 CONFIGURING AND ADJUSTING THE ENCODER SUPPLY VOLTAGE
- 269 CONNECTING THE RESOLVER CABLE
- 270 ENVIRONMENTAL REQUIREMENTS
- 270 ELECTRICAL RATINGS
- 272 ES950 BISS/ENDAT ENCODER BOARD (SLOT C)
- 274 IDENTIFICATION DATA
- 275 INSTALLING ES950 BOARD ON THE INVERTER (SLOT C)
- 277 BISS/ENDAT ENCODER CONNECTOR
- 278 INCREMENTAL ENCODER AND DIGITAL LINE CONNECTORS
- 279 ES950 CONFIGURATION AND OPERATING MODES
- 280 BISS OPERATING MODE
- 280 ENDAT OPERATING MODE
- 280 CONFIGURING AND ADJUSTING THE ENCODER SUPPLY VOLTAGE
- 282 CONNECTING THE ENCODER CABLE
- 284 ENVIRONMENTAL REQUIREMENTS
- 284 ELECTRICAL RATINGS
- 286 ES966 ENCODER BOARD HIPERFACE (SLOT C)
- 288 PART NUMBER
- 288 INSTALLING THE ES966 BOARD ON THE INVERTER (SLOT C)
- 291 HIPERFACE® ENCODER CONNECTOR
- 292 INCREMENTAL ENCODER CONNECTORS AND DIGITAL LINES
- 294 HIPERFACE® OPERATING MODE
- 295 CONFIGURING AND ADJUSTING THE ENCODER SUPPLY VOLTAGE
- 297 TEMPERATURE SENSOR CONFIGURATION
- 297 CONNECTING THE ENCODER CABLE
- 299 ENVIRONMENTAL REQUIREMENTS
- 299 ELECTRICAL SPECIFICATIONS
- 301 ES914 POWER SUPPLY UNIT BOARD
- 303 IDENTIFICATION DATA
- 303 WIRING ES914 BOARD
- 308 FOR IP54 MODELS
- 310 SWITCH AND EMERGENCY PUSH-BUTTON
- 311 INDEX