CONNECTION TO AN ENCODER OR A FREQUENCY INPUT. Enertronica Santerno Sinus Penta, SOLARDRIVE PLUS, IRIS BLUE, PENTA MARINE

Add to My manuals
312 Pages

MOTOR DRIVES USER MANUAL

ACCESSORIES

Screwable terminal board in three extractable sections suitable for cross-sections 0.2 ÷ 2.5mm

(AWG 24-12)

Decisive voltage class C according to EN 61800-5-1

N. Name Description

13 XDO1-NC Multifunction, relay digital output 1 (NC contact)

I/O Features

Change-over contact: with low logic level, common terminal is closed with NC terminal; with high logic level, common terminal is open with NO;

14 XDO1-C Multifunction, relay digital output 1 (common)

15 XDO1-NO Multifunction, relay digital output 1 (NO contact)

Resistive load capability:

Vomax = 250 VAC, Iomax = 5A

Vomax = 30 VDC, Iomax = 5A

16 XDO2-NC Multifunction, relay digital output 2 (NC contact)

Inductive load capability (L/R=7ms):

17 XDO2-C Multifunction, relay digital output 2 (common) Vomax = 250 VAC, Iomax = 1.5A

Vomax = 30 VDC, Iomax = 1.5A

18 XDO2-NO Multifunction, relay digital output 2 (NO contact)

19 XDO3-NC Multifunction, relay digital output 3 (NC contact)

Isolation test voltage between contacts and coil 2500Vac

50Hz, 1’

20 XDO3-C Multifunction, relay digital output 3 (common)

Min. load: 15mA, 10Vdc

21 XDO3-NO Multifunction, relay digital output 3 (NO contact)

XDO4-NC

XDO4-C

XDO4-NO

XDO5-NC

XDO5-C

XDO5-NO

XDO6-NC

XDO6-C

Multifunction, relay digital output 4 (NC contact)

Multifunction, relay digital output 4 (common)

Multifunction, relay digital output 4 (NO contact)

Multifunction, relay digital output 5 (NC contact)

Multifunction, relay digital output 5 (common)

Multifunction, relay digital output 5 (NO contact)

Multifunction, relay digital output 6 (NC contact)

Multifunction, relay digital output 6 (common)

15.4.

XDO6-NO Multifunction, relay digital output 6 (NO contact)

Connection to an Encoder or a Frequency Input

Auxiliary digital inputs XMDI6, XMDI7, XMDI8 may acquire fast digital signals and may be used for the connection to a push-pull single-ended incremental encoder or for the acquisition of a frequency input.

NOTE

When ES847 board is fitted, encoder B functions are no more implemented by the basic terminal board of the control board, but are implemented by ES847 board.

The electrical ratings of the aux digital inputs above are the same as the corresponding inputs in optional control board ES847.

For more details, please refer to Connection to an Encoder or a Frequency Input and ES847 Board

Terminals.

250/ 312