ANYBUS-S ETHERNET BOARD FOR MODBUS/TCP. Enertronica Santerno Sinus Penta, SOLARDRIVE PLUS, IRIS BLUE, PENTA MARINE

USER MANUAL MOTOR DRIVES

ACCESSORIES

11.12. Anybus-S Ethernet Board for Modbus/TCP

Ethernet communications board allows interfacing a drive to an external control unit with a communications interface operating with a Modbus/TCP Ethernet (IEEE 802) protocol complying with the Modbus-IDA V1.0 specifications. The IP rating for the communications board can be configured both through the on-board DIPswitches and automatically (network assignation through a DHCP protocol).

The communications board performs automatic negotiation with the mains if the baud rate is set to 10 or 100

Mbits/s.

The main features of the interface board are the following:

Parameter configuration for Ethernet connection through DIP-switches, DHCP/BOOTP, ARP or internal Web server

Modbus/TCP slave functions of class 0, class 1 and partially class 2

Transparent socket interface for potential implementation of “over TCP/IP” dedicated protocols

Ethernet interface galvanically isolated through a transformer

Figure 103: Ethernet Fieldbus Communications Board

205/ 312