NSTA/MSTA LEDS - PROFINET. Enertronica Santerno Sinus Penta, SOLARDRIVE PLUS, IRIS BLUE, PENTA MARINE

USER MANUAL

11.3.3. NSTA/MSTA LEDs - Profinet

L4/Network Status

LED State

Off

Green

Green, 1 flash

Green, blinking

Red

Red, 1 flash

Red, 2 flashes

Red, 3 flashes

Indication

Offline

Online (RUN)

Online (STOP)

Used by engineering tools to identify the node on the network

Fatal event

Station Name error

IP address error

Configuration error

L5/Module Status

LED State

Off

Green

Green, 1 flash

Red

Alternating Red/Green

11.3.4. NSTA/MSTA LEDs LEDs - Modbus/TCP

L4/Network Status

LED State

Off

Green

Green, flashing

Red

Red, flashing

Indication

No IP address or in state

EXCEPTION

At least one Modbus message received

Waiting for first Modbus message

IP address conflict detected, FATAL ERROR

Connection timeout. No

Modbus message has been received within the configured

“process active timeout” time

L5/Module Status

LED State

Off

Green

Red

Red, flashing

Alternating Red/Green

11.3.5. NSTA/MSTA LEDs - Ethernet IP

L4/Network Status

LED State

Off

Green

Green, flashing

Red

Red, flashing

Indication

L5/Module Status

LED State

No power or no IP address Off

Online, one or more connections established

(CIP Class 1 or 3)

Green

Online, no connections established

Duplicate IP address,

FATAL error

One or more connections timed out (CIP Class 1 or 3)

Green, flashing

Red

Red, flashing

11.3.6. NSTA/MSTA LEDs - EtherCAT

L4/RUN LED

LED State

Off

Green

Green, blinking

Green, single flash

Flickering

Red

Indication

INIT

OPERATIONAL

PRE-OPERATIONAL

SAFE-OPERATIONAL

BOOT

Fatal Event time

L5/ERR LED

LED State

Off

Red, blinking

Red, single flash

Red, double flash

Red

Flickering

MOTOR DRIVES

ACCESSORIES

Indication

Not Initialized

Normal Operation

Diagnostic Event(s)

Exception error

Fatal event

Firmware update

Indication

No power

Normal operation

Major fault, FATAL

Minor fault

Firmware update from file system in progress

Indication

No power

Controlled by a Scanner in

Run state

Not configured, or Scanner in Idle state

Major fault (EXCEPTIONstate, FATAL error etc.)

Recoverable fault(s).

Indication

No error (or no power)

Invalid configuration

Unsolicited state change

Sync Manager watchdog timeout

Application controller failure

Booting error detected

179/ 312