5. Preparation for Measurement. KYORITSU 2033
KYORITSU 2033 is a digital AC/DC clamp meter designed for safe and accurate current measurement. With its auto-ranging feature and a wide measuring range of up to 300A, it simplifies the process of measuring AC and DC currents without the need for manual range selection. Its compact size and tear-drop-shaped jaws make it ideal for use in tight spaces and crowded cable areas.
विज्ञापन
विज्ञापन
5. Preparation for Measurement
5-1 Checking Battery voltage
Set Function Selector switch to any position other than OFF .
When the display is clear without measurement.
is showing, proceed to
When the display blanks or is shown, replace the batteries according to section 8: Battery Replacement.
NOTE
The Sleep function automatically turns the instrument off in about five minutes after the last switch operation. Therefore, the display may be blank with the Function Selector switch set to a position other than OFF .
To operate the instrument in this case, set the switch back to the
OFF position, then to the desired position, or press any button. If the display still blanks, the batteries have exhausted. Then, replace the batteries.
5-2 Checking Switch Setting
Make sure that the Function Selector switch is set to the correct position and the Data Hold function is deactivated. Otherwise, desired measurement cannot be made.
— 9 —
डाउनलोड
विज्ञापन