8. Battery Replacement. KYORITSU 2033
KYORITSU 2033 is a digital AC/DC clamp meter designed for safe and accurate current measurement. With its auto-ranging feature and a wide measuring range of up to 300A, it simplifies the process of measuring AC and DC currents without the need for manual range selection. Its compact size and tear-drop-shaped jaws make it ideal for use in tight spaces and crowded cable areas.
Advertisement
Advertisement
8. Battery Replacement
# WARNING
● To avoid electric shock hazard, never try to replace batteries during measurement.
# CAUTION
● Do not mix new and old batteries.
● Make sure to install batteries in correct polarity as indicated in the battery compartment.
If the instrument is powered on, but the display blanks or "BATT" is shown on the display, replace the batteries
(1) Set the Function Selector switch to the "OFF" position.
(2) Press in the hole on the battery compartment cover with the tip of a pointed object, then slide open the cover.
(3) Replace the batteries observing correct polarity. Make sure to use two new LR44 or SR44 batteries.
(4) Slide the battery compartment cover back in place.
Battery Compartment Cover
— 13 —
DIRECTIVE 2006/66/EC.
This directive is valid only in the EU. When you remove batteries from this product and dispose them, discard them in accordance with domestic law concerning disposal. Take a right action on waste batteries, because the collection system in the EU on waste batteries are regulated.
This instrument satisfies the marking requirement defined in the WEEE Directive (2002/96/EC). This symbol indicates separate collection for electrical and electronic equipment.
— 14 —
Memo
— 15 —
Memo
— 16 —
DISTRIBUTOR
Kyoritsu reserves the rights to change specifications or designs described in this manual without notice and without obligations.
5-20 92-1401D
Download
Advertisement