7. Other Functions. KYORITSU 2033
KYORITSU 2033 is a digital AC/DC clamp meter designed for safe and accurate current measurement. With its auto-ranging feature and a wide measuring range of up to 300A, it simplifies the process of measuring AC and DC currents without the need for manual range selection. Its compact size and tear-drop-shaped jaws make it ideal for use in tight spaces and crowded cable areas.
Advertisement
Advertisement
7. Other functions
7-1 Sleep Function
NOTE
The instrument consumes small amount of current even in the Sleep
(power-down) mode. Make sure to turn the Function Selector switch to the "OFF" position, when the instrument is not in use.
This is a function to prevent the instrument from being left powered on in order to conserve battery life. This function causes the instrument to go into the Sleep (powered-down) mode about 5 minutes after the last switch or button operation. To exit the Sleep mode, turn the Function
Selector switch back to "OFF", then to any other position, or press any button.
7-2 Data Hold Function
This is a function used to freeze the measured value on the display.
Press the Data Hold button to freeze the reading. The reading will be held regardless of the subsequent variation in current under test.
The " " symbols is shown on the upper right corner of the display while the instrument is in the Data Hold mode.
To exit the Data Hold mode, press the Data Hold button again to release it.
NOTE:
If the instrument in the Data Hold mode goes into "sleep," the Data
Hold function will remain effective when the instrument is powered on again
— 12 —
Download
Advertisement