advertisement
![1 Safety Precautions. Beijer Electronics BoX2 extreme | Manualzz 1 Safety Precautions. Beijer Electronics BoX2 extreme | Manualzz](http://s1.manualzz.com/store/data/068142386_1-5917d613805a384790bbad5b31a6eca9-360x466.png)
Safety Precautions
1 Safety Precautions
Both the installer and the owner and/or operator of the operator panel must read and understand this installation manual.
1.1 General
•
•
•
•
•
•
•
•
•
•
•
•
Read the safety precautions carefully.
Check the delivery for transportation damage. If damage is found, notify the supplier as soon as possible.
Do not use the operator panel in an environment with high explosive hazards.
The supplier is not responsible for modified, altered or reconstructed equipment.
Use only parts and accessories manufactured according to specifications of the supplier.
Read the installation and operating instructions carefully before installing, using or repairing the operator panel.
Never allow fluids, metal filings or wiring debris to enter any openings in the operator panel. This may cause fire or electrical shock.
Only qualified personnel may operate the operator panel.
The figures in this manual serve an illustrative purpose. Because of the many variables associated with any particular installation, the supplier cannot assume responsibility for actual use based on the figures.
The supplier neither guarantees that the operator panel is suitable for your particular application, nor assumes responsibility for your product design, installation or operation.
It is recommended to turn on and shut down the operator panel at least once before installing any components/cards or before connecting the operator
– panel to external devices; for example serial devices.
–
For Marine panels only:
The operator panel must be installed and operated as described in this document to meet this certification.
Observe precautions for handling electrostatic discharge sensitive devices
1.2 Hazardous Materials
Part description
零件描述
Pb
Toxic and hazardous materials or elements
有毒和有害的材料或元素
Hg Cd Cr6+ PBB PBDE
PCB and electronic components
PCB 和电子元件
X O O O O O
O: Indicates that this toxic or hazardous substance contained in all of the homogenous materials for this part is below the limit requirement in SJ/T 11363–2014.
O : 表示该有害物质在该部件所有均质材料中的含量均在 SJ/T 11363–2014 规定的限
量要求以下。
X: Indicates that this toxic or hazardous substance contained in at least one of the homogenous materials for this part is above the limit requirement in SJ/T 11363–2014.
Beijer Electronics, MAEN276 7
advertisement
Related manuals
advertisement
Table of contents
- 7 1 Safety Precautions
- 7 General
- 7 Hazardous Materials
- 8 Disposal Requirements Under WEEE Regulations
- 8 UL and cUL Installation
- 9 IECEx/ATEX Certificate and Dust Rating
- 9 Conditions of Safe Use for Zone 2/22 ATEX/IECEx
- 9 During Installation
- 10 During Use
- 10 Service and Maintenance
- 10 Dismantling and Scrapping
- 11 2 Installation
- 11 Installation Process
- 13 Protective Connector Shield Installation Process
- 14 Connections to the Controller
- 14 Other Connections and Peripherals
- 15 3 Technical Data
- 17 4 Chemical Resistance
- 17 Metal Casing
- 19 5 Operator Panel Drawings
- 19 Connectors
- 19 Power Supply
- 19 COM A
- 20 LAN A / LAN B
- 20 COM B
- 21 BoX2 extreme Outline
- 23 6 Additional Installation Tips
- 23 Grounding the operator panel
- 23 To Achieve Better EMC Protection
- 25 Safety
- 26 Galvanic Isolation
- 27 Cable and Bus Termination RS