advertisement
▼
Scroll to page 2
of
28
Safety Precautions
1.8 During Use
•
•
Keep the operator panel clean.
Emergency stop and other safety functions may not be controlled from the operator panel.
1.9 Service and Maintenance
•
•
•
•
Only qualified personnel should carry out repairs.
The agreed warranty applies.
Before carrying out any cleaning or maintenance operations, disconnect the equipment from the electrical supply.
The battery must be replaced by an authorized Beijer Electronics service center.
1.10 Dismantling and Scrapping
•
•
The operator panel or parts thereof shall be recycled according to local regulations.
The following components contain substances that might be hazardous to health and the environment: lithium battery and electrolytic capacitor.
10 Beijer Electronics, MAEN276
advertisement
Related manuals
Download
PDF
advertisement
Table of contents
- 7 1 Safety Precautions
- 7 General
- 7 Hazardous Materials
- 8 Disposal Requirements Under WEEE Regulations
- 8 UL and cUL Installation
- 9 IECEx/ATEX Certificate and Dust Rating
- 9 Conditions of Safe Use for Zone 2/22 ATEX/IECEx
- 9 During Installation
- 10 During Use
- 10 Service and Maintenance
- 10 Dismantling and Scrapping
- 11 2 Installation
- 11 Installation Process
- 13 Protective Connector Shield Installation Process
- 14 Connections to the Controller
- 14 Other Connections and Peripherals
- 15 3 Technical Data
- 17 4 Chemical Resistance
- 17 Metal Casing
- 19 5 Operator Panel Drawings
- 19 Connectors
- 19 Power Supply
- 19 COM A
- 20 LAN A / LAN B
- 20 COM B
- 21 BoX2 extreme Outline
- 23 6 Additional Installation Tips
- 23 Grounding the operator panel
- 23 To Achieve Better EMC Protection
- 25 Safety
- 26 Galvanic Isolation
- 27 Cable and Bus Termination RS