___________________________________________________________________________
Products which can be connected Contents
Part F
___________________________________________________________________________
1
2
Terminal port communications
1.1
Characteristics of the terminal port
1.2
General information about the terminal port
1.3
TSX Nano in ASCII mode
1.4
TSX Nano Master on UNI-TELWAY
1.5
TSX Nano Slave on UNI-TELWAY
1.6
UNI-TELWAY Time-out (TSX 07 3
●
)
1.7
XBT operating terminals or CCX 17 operator panels
1.8
UNI-TE requests supported by TSX Nano ( server)
Extension port communications
2.1
Characteristics of the MODBUS/JBUS extension port
2.2
MODBUS/JBUS on TSX Nano
2.2-1 General
2.2-2 Configuring the MODBUS link
2.2-3 Requests supported by the TSX Nano in MODBUS
2.2-4 Managing the COM LED
2.2-5 Associated bits and system words
2.3
Standard MODBUS requests
2.3-1 Reading n internal bits %Mi
2.3-2 Reading n internal words %MWi
2.3-3 Writing an internal bit %Mi
2.3-4 Writing an internal word %MWi
___________________________________________________________________________
F/1
Page
1/1
A
1/1
1/2
1/3
1/4
1/7
1/8
1/9
1/10
2/1
2/1
2/7
2/7
2/8
2/9
2/10
2/2
2/2
2/4
2/5
2/6
2/6
F
F
___________________________________________________________________________
Products which can be connected Contents
Part F
2.3-5 Writing n internal bits %Mi
2.3-6 Writing n internal words %MWi
2.3-7 Calculation of LRC
2.3-8 Algorithm for calculating CRC 16
2.4
Access requests by the TSX Nano to the UNI-TE server
2.4-1 Identification
2.4-2 Read-CPU
2.4-3 RUN request
2.4-4 STOP request
2.4-5 INIT request
2.5
Limitations
2/13
2/14
2/15
2/16
2/17
2/17
2/18
Page
2/10
2/11
2/11
2/12
___________________________________________________________________________
F/2
