Presentation of the Electronic Cam Module
Presentation of the Module in its Environment
Introduction The TSX CCY 1128 is a standard format application-specific module in the
Premium range. It can be integrated in a TSX RKY•• rack on a TSX/PMX/PCX 57
PLC station. It performs the "electronic cam" function for a rotary, alternating, cyclic or endless axis, managed by an incremental or absolute encoder.
Operating
Principle
The module manages up to 128 cams independently. The cams may be distributed over a maximum of 32 tracks, to which up to 24 physical outputs and 8 logic outputs can be assigned. After transmission of configuration and adjustment data by the PLC processor, the module processes the cam program and controls the track outputs independently of the PLC scan. The various functions of the module are described in the "Electronic cam" application-specific manual - Reference
35001381.
Diagram of an
Installation
The diagram below shows a basic configuration for an installation
For example: TSX 57
PLC station Machine
Control elements
Programming and adjustment terminal equipped with
PL7 Junior/Pro software TSX CCY
1128
Encoder signals
Auxiliary inputs
Encoder
Sensors
Track outputs
Actuators
4
