Presentation of the TSX CSY 84 Module
Physical Presentation of the Module
Description of the Front Panel
The following items are to be found on the front panel of the module:
●
●
●
● a display block consisting of 6 indicator lamps to display and diagnose the state of the module.
a set of 24 indicator lamps to display and diagnose the various channels of the module two connectors for attaching the fiber optic cables which link the module and the drives. two 8-pin Mini DIN connectors.
View of the
Module
The diagram below shows the TSX CSY 84 module with its various elements.
TSX CSY 84
7
8
9
4
5
6
1
2
3
6
Presentation of the TSX CSY 84 Module
Physical Presentation of the Module, continued
Elements and their Functions
Number Element
1 Screw
2 Module casing
3 Display block of 6 indicator lamps:
Function
Used to fix the module on the TSX RKY •• rack
Performs the following functions:
• supports and protects the electronic cards
• fixes the module in its slot
Display the module states and faults
6
7
4
5
8
9
• green RUN indicator lamp
• red ERR indicator lamp
• red I/O indicator lamp
• yellow SER indicator lamp
• yellow COM indicator lamp
• yellow INI indicator lamp
Indicates the operating mode of the module
Indicates a module internal fault
Indicates a fault external to the module or an application fault
Indicates traffic on the SERCOS ® network during normal operation
Not used
Indicates that the module is in the reinitialization phase
Used to initialize the module
Reserved
Pencil-point pushbutton
COM2 8-pin Mini DIN connector
24 indicator lamps
COM1 8-pin Mini DIN connector
TX transmission SMA connector
Display and diagnose the module channels
Reserved
For connecting the fiber optic transmission cable from the SERCOS ® network ring
RX reception SMA connector For connecting the fiber optic reception cable from the SERCOS ® network ring
7
