6.4 Hard Drive. HP Compaq nc6230 Notebook PC, Compaq nc6220 Notebook PC, PU984AW

Removal and Replacement Procedures

6.4 Hard Drive

7200-rpm

60-GB

Hard Drive Spare Part Number Information

380950-001

5400-rpm

80-GB

60-GB

40-GB

379810-001

379809-001

379808-001

1. Prepare the computer for disassembly (refer to Section 6.3

).

2. Position the computer with the right side toward you.

Maintenance and Service Guide 6–7

Removal and Replacement Procedures

3. Loosen the two PM1.5×4.0 screws 1 that secure the hard drive cover to the computer.

4. Lift the right side of the hard drive cover 2 and swing it to the left.

5. Remove the hard drive cover.

✎

The hard drive cover is included in the Miscellaneous

Plastics Kit, spare part number 379812-001.

Removing the Hard Drive Cover

6–8 Maintenance and Service Guide

Removal and Replacement Procedures a. Loosen the PM2.5×13.0 spring-loaded hard drive retention screw 1 .

b. Grasp the mylar tab on the right side of the hard drive and slide the hard drive 2 to the left to disconnect it from the system board.

c. Remove the hard drive 3 from the hard drive bay.

Removing the Hard Drive

Maintenance and Service Guide 6–9

Removal and Replacement Procedures d. Remove the four PM2.5×4.0 screws 1 and the two PM1.5×4.0 screws 2 that secure the hard drive frame to the hard drive.

e. Lift the frame 3 straight up to remove if from the hard drive.

f. Remove the hard drive connector 4 from the hard drive.

Removing the Hard Drive Frame and Connector

Reverse the above procedure to install and reassemble the hard drive.

6–10 Maintenance and Service Guide